Search results for: 'Sensor'

MPXV7002 Airspeed Module Features The MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional ...

Tilt Switch Sensor Features The function of this sensor is similar to a switch. There are 2 rolling ball inside the cylindrical housing of the sensor. Depending on how the two ball are positioned, the switch is connected and disconnected. Tilt Switch Sensor Pinout This sensor has 3 pins:VCC: Module power supply –3.3-5 VGND: GroundOUT: Digital outputYou can see pinout of this module in the image below. Required Materials ...

R301T Fingerprint Module Features This is an integrated fingerprint module with image collecting and algorithm chip together. It works in different conditions of the fingers, whether the fingers dry, wet, light texture, or old. It works in a variety of applications such as access control, safety deposit boxes. This fingerprint module communicates with the controllers with UART, Connect to any microcontroller or system with TTL serial, and sends packets of data to take photos, detect prints, hash, and se...

YwRobot Vibration Sensor Features Tilt sensors detect vibrations by having small metal spheres inside. You can use the generated signal to make an alarm if there is vibration. The output of this sensor is a digital signal. This Vibration Sensor is easy to interface with Arduino and you can use it to detect vibration. YwRobot Vibration Sensor Pinout This sensor has 4 pins:5V: Module power supply –2.4 V to 5 VGND: GroundOUT: OutputYou can see pinout of this module in...

TTP223 Capacitive Touch Sensor Features The TTP223 sensor can be used in a wide range of applications such as smartphones and tablets. It can also detect from behind glass and thin surfaces. When a finger touches the sensor, the module output gets HIGH, and immediately switches to LOW if not touched. The operating voltage is 2 to 5.5 V. Its maximum response time is 220 milliseconds. You can download the datsheet of this module here. [wpdm_package id='19196'] TTP223 Capacitive Touch Sensor...

TMP36 Temperature Sensor Features The TMP36 sensor is used to measure temperature from -40°C to +125°C and its tolerance threshold is +150°C. This sensor is calibrated directly on Celsius and its accuracy is 2°C. This sensor has an analog output. The output voltage changes linearly as the temperature changew. For example, the sensor output voltage is 0.75 volts at 25°C and 2.7 volts at 125°C.This sensor can be used in environmental control systems, thermal protection, fire alarms, CPU thermal m...

Piezoelectric Vibration Sensor Features Piezoelectric vibration sensor is based on piezoelectric ceramic sheet. This sensor uses piezoelectric ceramics to generate vibration. When the piezoelectric ceramic piece vibrates, an electrical signal is generated.This sensor has two digital and analog outputs. The greater the vibration intensity, the higher the analog output voltage. Vibration amplitude sensitivity can be adjusted by the potentiometer. Note When the sensor vibrates, the digital outpu...