Search results for: 'sensors arduinos'

YF-S201C Water Flow Sensor Features YF-S201C is a sensor used to measure the water flow. This water flow sensor mainly consists of a plastic valve body, rotor assembly, and hall effect sensor. This module works based on the hall magnetic effect. So when water flows through the rotor assembly, the rotor will rotate and the hall effect sensor will produce an electric pulse. By counting these generated pulses, the amount of water passing through the sensor can be calculated.The measuring range of water fl...

YF-S201 Water Flow Sensor Features YF-S201 is a sensor used to measure the water flow. This water flow sensor mainly consists of a plastic valve body, rotor assembly, and a hall effect sensor. This module works based on the hall magnetic effect. So when the water flows through the rotor assembly, the rotor will rotate and the hall effect sensor will produce an electric pulse. By counting these generated pulses, the amount of water passing through the sensor can be calculated.The measuring range of wat...

AP3216 Sensor Features The AP3216C is an integrated ALS & PS module that includes a digital ambient light sensor [ALS], a proximity sensor [PS], and an IR LED in a single package. This module is well suited to applications under clear glass or darkened glass. The proximity function is targeted specifically towards near field application and detects external object with simple configurable zone controlled by registers.  Note You need a 220 to 470 ohm resistor to interface this module. ...

YwRobot Touch Sensor Module Features Touch Sensor is used to detect human finger touch. It is known as a touch switch as well. These sensors are easy to use and useful in many projects. Before touching the sensor, the output signal is always HIGH. When a human finger touches the sensor, it will generate a LOW level signal. This module also has an LED that lights up when the sensor is touched. Note This module works in trigger mode. That is when the sensor is touched, the digital output is LOW a...

Grove Touch Sensor Features This sensor uses TTP223-B IC. When your finger approaches this sensor, the capacitance of the metal surface will change. So you don’t need to touch sensor completely. Besides, you can put this sensor under a non-metallic surface and touch it. This sensor is waterproof, and it has a variety of applications.  Note There are two red and black wire that have been connected to this sensor. If you want to increase the fingerprint sensitivity, you can remove the black w...

SW-520D Tilt Sensor Module Featurs A SW-520D Tilt Sensor is an electronic device that detects the orientation of an object and gives its output High or Low accordingly. Basically, it has a metallic ball inside it which moves and makes the circuit. The sensor's sensitivity is at 10 degrees tilt. This module has two output pins for each path. When tilt angle is more than 10 degree, the output is low. Note The output is on trigger mode. You can download the datasheet of this module ...

HTTM Series Capacitive Touch Sensor Features This touch module is available in different series with a variety of backlight colors. It features low price, high efficiency and long lifespan. The sensor part can also be placed on glass and thin plastic.Its output is on trigger mode which works like a switch. That is, when it is touched, its will be HIGH and remains HIGH until the next touch.The input voltage is 2.7 to 6 V and output pin voltage is 3.3 V. You can download t...

TTP223 Capacitive Touch Sensor Features The TTP223 sensor can be used in a wide range of applications such as smartphones and tablets. It can also detect from behind glass and thin surfaces. When a finger touches the sensor, the module output gets HIGH, and immediately switches to LOW if not touched. The operating voltage is 2 to 5.5 V. Its maximum response time is 220 milliseconds. You can download the datsheet of this module here. [wpdm_package id='19196'] TTP223 Capacitive Touch Sensor...

MicroDuino Touch Sensor Features This touch button is a simple digital output sensor. It uses the TTP223 chip to detect capacitance change. This sensor features small size, high sensitivity, long power consumption and long lifespan. When the sensor is touched, its output is LOW, otherwise it is HIGH. You can download the datsheet of this module here. [wpdm_package id='19221'] MicroDuino Touch Sensor Pinout This Module has 4 pins: VCC: Module power supply – 3.3 to 5 V GND: Ground OUT: ...

SR602 PIR Motion Detection Sensor Features PIR or Passive Infra-Red sensors detect motion based on infrared light of ambient heat. PIR sensors are commonly used in security alarms to detect the presence of human. The SR602 sensor is able to detect movement up to a distance of about 3 meters. This sensor has a digital output. When it detects motion, output will be High and it last 2.5 second. After that it returns to LOW. Note You can adjust sensitivity and HIGH time duration usin...