Search results for: 'arduinos'

HTU21D Sensor Features The HTU21D is a digital humidity and temperature sensor. It uses I2C communication and there are 2 SCL and SDA pins that are needed to be hooked up in order to communicate to this sensor. This sensor is ideal for temperature and humidity sensing. Humidity measuring range: 0-100% RH°/ Accuracy ±2% Temperature measurement range: -40 ° +125 °/ Accuracy ±0.3C You can download the datasheet of this module here.  [wpdm_package id='17292'] HTU21D Sensor Pinout Thi...

SRF05 Ultrasonic Module Features SRF05 is an ultrasonic transmitter and receiver module used to measure distance. The sensor operation is very simple. You only need to measure the return time of ultrasonic waves in order to measure the distance. Then you should divide measured time by 2 and multiply by the sound speed. The sensor measuring range is about 2 to 400 cm. You can download the datasheet of this module here. [wpdm_package id='17336'] SRF05 Ultrasonic Module Pinout This sensor has 3 pi...

801S Vibration Module Features The 801S vibration sensor module has a digital output pin that gives HIGH output by detecting vibration up to a certain threshold. The sensitivity of this sensor can be adjusted with a potentiometer on the module. The IC on this module is LM358. This module can be used in security systems. Note The module's sensitivity is very high. You can download the datasheet of this module here. [wpdm_package id='17349'] 801S Vibration Module Pinout This sensor has 3 pins: ...

MPS20N0040D Pressure Module Features The MPS20N0040D Pressure and Altitude Sensor Module is an MPS20N0040D pressure sensor that receives altitude data and transmits it to the HX710 IC, which is an ADC converter. This module is used to measure the ambient pressure and the pressure difference of liquid levels. Note: This module does not support I2C communication. You can download the datasheet of this module here.[wpdm_package id='17459'] MPS20N0040D Pressure ...

BME280 Module Features The BOSCH BME280 is a small-size, high accuracy barometric pressure module. Its small dimensions and low power consumption makes it a suitable choice for mobile phones, GPS modules and smart watches. BME280 technology is based on piezoelectric pressure and has a high accuracy, linearity and high stability and durability. In this tutorial, you will learn how to interface this module using I2C protocol. You can download the datasheet of this module here. [wpdm_package...

LM393 Sensor Features The LM393 module is an IR counter that has an IR transmitter and receiver. If any obstacle is placed between these sensors, a signal is sent to the microcontroller. The module can be used in association with a microcontroller for motor speed detection, pulse count, position limit, etc. You can download the datasheet of this module here. [wpdm_package id='17841'] LM393 Sensor Pinout This sensor has 3 pins: VCC: Module power supply – 3-5.5 V GND: Ground OUT: Digital...

MPL3115A2 Sensor Features This small board has an MPL3115A2 pressure sensor or barometer. The communication protocol of this module is I2C. In addition to measuring pressure and altitude, this module can also measure temperature. MPL3115A2 Module Pinout This sensor has 6 pins:+5V: Module power supply – 5 VGND: GroundSLC: I2C ClockSDA: I2C dataYou can see pinout of this module in the image below. You can download the datasheet of this...

MPL3115A2 Pressure/Altitude Sensor Features The MPL3115A2 pressure and altitude sensor is a MEMS pressure sensor that generates altitude data. The sensor outputs are converted to digital data by high-resolution 24bit ADC and transfer over I2C, which means that this module easily communicates with most microcontrollers. The unit of pressure and height is Pascal and meter respectively. The module also measures 12-bit temperature in degrees Celsius. MPL3115A2 Module Pinout ...

LPS331AP Pressure/Altitude Module Features This small board has an LPS331AP pressure sensor or barometer. The communication protocol of this module is I2C and SPI. In addition to measuring pressure and altitude, this module can also measure temperature. LPS331AP Sensor Pinout This sensor has 9 pins. 4 pin are more useful:+5V: Module power supply – 5 VGND: GroundSLC: I2C ClockSDA: I2C dataYou can see pinout of this module in the image below. ...

SHT31 Temperature & Humidity Sensor Features SHT31 is a digital temperature and humidity sensor. This module uses I2C communication and there are two SCL and SDA pins that are needed to be hooked up in order to communicate to this sensor. This sensor is ideal for temperature and humidity sensing. Temperature measurement range: -40° +125°/ Accuracy ±0.3C° Humidity measuring range: 0-100% RH°/ Accuracy ±2% You can download the datasheet of this module here. [wpdm_package id=...