Search results for: 'on arduin arduinos'

Piezoelectric Vibration Sensor Features Piezoelectric vibration sensor is based on piezoelectric ceramic sheet. This sensor uses piezoelectric ceramics to generate vibration. When the piezoelectric ceramic piece vibrates, an electrical signal is generated.This sensor has two digital and analog outputs. The greater the vibration intensity, the higher the analog output voltage. Vibration amplitude sensitivity can be adjusted by the potentiometer. Note When the sensor vibrates, the digital outpu...

XKC-Y26-V Non-contact Liquid Level Sensor Features The XKC-Y26-V Non-Contact Liquid Level Sensor is a digital output sensor that detects the presence of liquid. There is an LED on the module, which will turn on if liquid is detected, otherwise it turns off. There is also a screw on the body of the module that you can use to adjust the sensitivity of the sensor. This sensor is suitable for dangerous applications such as detection of toxic substances, strong acids, strong alkalis, etc. ...

HW-M10 Microwave Sensor Module Features The HW-M10 microwave sensor module is very accurate and widely used for motion detection in alarm and security systems. This module, like the PIR module, can detect any movement. The only difference is that instead of using radiation emitted by or reflected from objects, it uses microwave Doppler radar technology. This module has a digital output that is normally Low and becomes High (3.3V) if it detects motion and remains High for 2 to 3 seconds. ...

AD8232 ECG Module Features The AD8232 sensor can provide you to monitor electrocardiographic or ECG signals. Analyzing these signals prepares useful information about heart function, such as heartbeat rate, heart rhythm, and other information regarding the heart’s condition. This module can be connected to a microcontroller on one side and to specific parts of body on the other side using 3 special electrodes. The signal received through the electrodes can be seen in the analog output of the sensor. ...

ADS1232 24-Bit ADC Module Features Almost all microcontrollers come with ADC pins, but they lack high precision. In a lot of projects, analog values need to be measured with high accuracy, or the voltage level of the measured signal is not within the microcontroller measurement range, or even the microcontroller used doesn’t have an ADC pin. In such cases, analog to digital converter modules are used.ADS1232 module is an analog to digital converter module that has 24-bit precision. This module can be ...

Overview Have you ever wanted to use 2 sensors with the same I2C address at the same time, not knowing what to do? Faced some serious challenges in doing that? In a lot of projects, we have used different modules and sensors that support I2C communication protocol. Sometimes, we have interfaced some I2C modules with a microcontroller in our projects. If they all have different I2C addresses, we could easily interface them, facing no serious trouble. But, if 2 or more of the modules had the same I2C address...

Overview Sometimes in electronic projects, you need to use two or more microcontrollers in your circuit at the same time. Normally, these microcontrollers are connected to each other and keep transmitting data with one another. The transmitting of data between two or more microcontrollers can be done with several communication protocols such as SPI, UART, CAN, USB, etc. Another one which we will be covering here in this tutorial is I2C (Inter-Integrated Circuit) protocol. Using this protocol, one of the mi...

Introduction Are you looking to enhance your smart and security systems? Want to create projects that detect motion and automate your home? Look no further!  Introducing the HW-MS03 motion detection module, a powerful radar sensor that can revolutionize your projects. Whether you want to secure your premises, automate lighting systems, or develop cutting-edge applications, this module is your key to unlocking endless possibilities.The basic task of these sensors, as you can guess by their name, is to ...

Introduction Analog-to-digital converters (ADCs) convert analog data into digital format. The 16-bit ADS1110 module offers good accuracy for measuring analog data with the microcontroller. In this tutorial, we will interface an ADS1110 module with Arduino. The communication between the module and the Arduino board is done by the I2C protocol. Tip: The built-in 10-bit ADC of Arduino has a lower accuracy compared to the ADS1110 module. Therefore, to measure the anal...

Introduction Welcome to our step-by-step tutorial on ESP32CAM! Are you curious about the exciting world of the Internet of Things (IoT) and eager to level up your video skills? In this comprehensive tutorial, we’ll get to know the ESP32CAM module. Whether you're a tech enthusiast, a student, or a developer with a passion for IoT, this tutorial will equip you with the knowledge and skills needed to bring your related projects to life. We'll walk you through every step, from interfacing the ESP32CAM module ...