Search results for: 'RF MODULE'

Discover how to effectively interface the IRF520 MOSFET Driver Module (HCMODU0083) with Arduino in this step-by-step tutorial. Learn about the key features of this module and explore its applications in controlling DC motors using Pulse Width Modulation (PWM) technique. With the ability to convert a constant input voltage to a variable voltage, this module allows precise control over the speed of your DC motor. Whether you're a beginner or an experienced Arduino enthusiast, this guide will help you master t...

Touch Switch Module Features A touch sensor is a type of switch that needs to be touched by an object to operate. Touch sensors work completely similar to a switch. Note When this switch is touched, the output voltage will be HIGH, otherwise is LOW. Note The output current is very low (about 40 mA). If you want to connect a higher current device to this switch, you must add a relay or transistor to your circuit. Note There is a jumper on the board. If you change the status ...

Heart Rate Pulse Sensor Features Heart Rate Pulse Sensor can be used to measure the heart rate and some related parameters such as cardiac arrhythmia (i.e., abnormal heart rhythm). If you touch this sensor with any area of your skin that is closest to the arteries (such as the finger or earlobe), the sensor detects blood in the arteries. Each time the heart beats, blood is pumped through the arteries, and the sensor detects the flow of blood and increases the output voltage. Note This sensor has an analog o...

WSN-03 Wireless Module Features This module features:Transmitting and receiving data over long distances (3.5 to 4 km)Operating frequency: 433, 470, 868 and 915 MHzData transfer sensitivity: 120dBmW (decibel-milliwatts)Receiving current: less than 30 mATransmitting current: less than 30 mAsleep mode current: less than 5 mA You can download the datasheet of this module here.[wpdm_package id='19515'] WSN-03 Wireless Module Pinout This Module has 8 pins:3V: Module ...

TLP281 4-Channel Opto-isolator IC Module Features Sometimes we need to separate the low-voltage section (microcontroller) from the high-voltage one in circuit in order to prevent noise and damage to the microcontroller. This module isolates the low-voltage section from the high-voltage section using TLP281-4 IC. This IC contains 4 LEDs (Light Emitting Diode). 4 high-voltage channels can be controlled by microcontroller using this IC.This module can also be used to turn on and off the servo motor and oth...

SI7021 Temperature and Humidity Sensor Features The SI7021 humidity and temperature sensor is a CMOS integrated sensor with I2C communication protocol. This sensor is factory calibrated and calibration data is stored in an on-chip non-volatile memory.This sensor is used in various applications such as thermostat and humidistats, respiratory therapy, Indoor weather stations, tablets, mobile phones, etc.Humidity measurement range: 0 to 100%RH - Accuracy 3%RHTemperature measuring range: -40°C to +125°C ...

X9C103S Digital Potentiometer Module Features The X9C103S 10k digital potentiometer module is a variable resistor whose resistance value can be varied digitally from a microcontroller. It consists of a 3-pin output which can replace a mechanical potentiometer which has 3 pins. This module has 99 resistance components and the final resistor is controlled by a 3-wire interface. X9C103S Digital Potentiometer Module Pinout This sensor has 8 wires:VCC: Module power suppl...

PCF8563 RTC Module Features The PCF8563 real time clock module features high accuracy and low power consumption. This RTC maintains seconds, minutes, hours, day, date, month, and year information. In this module, the date is set based on whether the month is 29, 30 or 31 days and also it is leap year or not. This module can also be used in 12-hour and 24-hour formats. DS3231 RTC Module Pinout This module has 6 pins:INT: interrupt outputCOT: Clock outputSCL: Seria...

PS2 Joystick Module Features This module consist of two joysticks and two independent buttons. The joystick is very useful in robotics. Each joystick has two potentiometers on two X and Y axes and one push button. This module has two analog outputs and one digital output. In robotics, it can be used to control moving parts and motors. How it works This module contain two potentiometers in both X and Y axis. As shown below, the joystick is normally in the ...