Search results for: 'with 2'

SW-520D Tilt Sensor Module Featurs A SW-520D Tilt Sensor is an electronic device that detects the orientation of an object and gives its output High or Low accordingly. Basically, it has a metallic ball inside it which moves and makes the circuit. The sensor's sensitivity is at 10 degrees tilt. This module has two output pins for each path. When tilt angle is more than 10 degree, the output is low. Note The output is on trigger mode. You can download the datasheet of this module ...

TTP223 Capacitive Touch Sensor Features The TTP223 sensor can be used in a wide range of applications such as smartphones and tablets. It can also detect from behind glass and thin surfaces. When a finger touches the sensor, the module output gets HIGH, and immediately switches to LOW if not touched. The operating voltage is 2 to 5.5 V. Its maximum response time is 220 milliseconds. You can download the datsheet of this module here. [wpdm_package id='19196'] TTP223 Capacitive Touch Sensor...

2.8 INCH TFT DISPLAY Shield Features This module is a 2.8-inch TFT LCD module with "320X240" resolution and suitable for Arduino Uno and Mega2560 development boards. It's a touch display shield and uses 8-bit parallel port communication. You can download the datasheet of this module here. [wpdm_package id='19253'] 2.8 INCH TFT Display Shield Pinout This module has 20 pins:5V: Module power supply – 5 V3.3V: Module power supply – 3.3 VGND: GroundLCD_RST: LCD...

SR602 PIR Motion Detection Sensor Features PIR or Passive Infra-Red sensors detect motion based on infrared light of ambient heat. PIR sensors are commonly used in security alarms to detect the presence of human. The SR602 sensor is able to detect movement up to a distance of about 3 meters. This sensor has a digital output. When it detects motion, output will be High and it last 2.5 second. After that it returns to LOW. Note You can adjust sensitivity and HIGH time duration usin...

I2C 16x2 Character LCD Features The 16x2 character LCD has two rows with the ability to display 16 ASCII characters on each row. Normal 16x2 character LCDs use 7 digital pins, while this module with I2C interface has reduced this number to 2 pins. A potentiometer is also included to adjust the display contrast. These LCDs have many applications and are used in cases such as: copiers and fax machines, laser printers, industrial testing tools, etc. You can download the d...

Discover how to effectively interface the IRF520 MOSFET Driver Module (HCMODU0083) with Arduino in this step-by-step tutorial. Learn about the key features of this module and explore its applications in controlling DC motors using Pulse Width Modulation (PWM) technique. With the ability to convert a constant input voltage to a variable voltage, this module allows precise control over the speed of your DC motor. Whether you're a beginner or an experienced Arduino enthusiast, this guide will help you master t...

TB6612FNG Dual Motor Driver Features Today, controlling the speed and direction of DC motors is very important due to their many applications. The most common method of controlling DC motors is the H-Bridge. This method allows you to control both the speed and the direction of the engine. The TB6612FNG dual module uses the same method to control two motors.One of the control pins of this module is PWM. This pin is connected to the gate of the transistor. The longer the duty cycle, the higher the voltag...

VNH2SP30 Monster Motor Shield Features Today, speed and direction control of DC motors is very common. These motors are widely used in manufacturing many tools and equipment. A full-bridge circuit is one of the simplest methods to control a DC motor. This method not only allows to control the motor direction, but can also be used for speed control. This shield contains a pair of VNH2SP30 full-bridge motor drivers. This driver has a higher current tolerance in compare to its similar drivers. This shield...

CJMCU-0201 Double Touch Sensor Features A touch sensor is a type of switch that only has to be touched by an object to operate. Touch sensors work completely similar to a switch. This sensor has two separate pads and can be used as two separate switches. Note When this switch is subjected to touch, the output voltage will be HIGH, otherwise it is LOW. Note The output current is very low (about 40 mA). If you want to connect a higher current device to this switch, you must add a rela...

VNH2SP30 Moster Motor Driver Module Features Today, speed and direction control of DC motors is very common. A Full-Bridge circuit is one of the simplest methods to control a DC motor. This module is a Full-Bridge motor driver with high output current tolerance.INA, INB and PWM pins are used for controlling the speed and direction of motor rotation. The CS pin is also the current sensor. This pin's output voltage changes 0.13V per 1A.The input voltage should be between 5.5 and 16V. Also, the maximum al...