Search results for: 'pi a'

0.96 INCH OLED Display Module Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels. So, it is thinner, low-power and more elegant in compare to LCDs. The driver chip is SSD1306, which provides SPI communication. You can download the datasheet of this module here.  [wpdm_package id='20547'] 0.96 INCH OLED Display Module Pinout...

0.96 INCH OLED IPS Display Module Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels. So, it is thinner, low-power and more elegant in compare to LCDs. The driver chip is ST7735, which provides I2C communication. You can download the datasheet of this module here.  [wpdm_package id='20572'] 0.96 INCH SPI OLED IPS Display ...

Piezoelectric Vibration Sensor Features Piezoelectric vibration sensor is based on piezoelectric ceramic sheet. This sensor uses piezoelectric ceramics to generate vibration. When the piezoelectric ceramic piece vibrates, an electrical signal is generated.This sensor has two digital and analog outputs. The greater the vibration intensity, the higher the analog output voltage. Vibration amplitude sensitivity can be adjusted by the potentiometer. Note When the sensor vibrates, the digital outpu...

Adafruit Bluefruit LE SPI Friend Bluetooth Module Features Bluetooth modules are a type of wireless communication modules that can be added to a project through the serial or SPI communication protocols.The advantage of using Bluetooth modules is that they are easy to set up and use.The Adafruit Bluefruit  BL SPI Friend module supports SPI communication.This module makes it easy to add Bluetooth to any board. Using SPI communication protocol, you no longer have to worry about speed (baud rate), ...

Mojo V3 FPGA Development Board Features Mojo V3 is an FPGA board of the Spartan 6 series, which lets you get the pleasure of configuring digital circuits on Mojo v3 based on your own specifications. What separates this FPGA from the others is the ease of use. The goal of Mojo v3 is to get you up and running with FPGA as easily as possible.The Mojo v3 FPGA Board uses the Spartan 6 and a high performance ATmega32U4 microcontroller. This board has high processing power. The ATmega32U4 microcontroller comes...

Overview You all remember the nostalgic Snake game on old Nokia phones. Sometimes you miss these games, but you are not able to access Nokia phones to play the game. In this case, you can easily make this game for yourself and enjoy it with an Arduino board and an LCD.As you remember, the snake grew bigger and bigger with food, and the game continued until the snake hit itself. The bigger the snake, the harder it would be to continue playing and controlling it, as well as the higher your record. ...

Overview There are two main ways to program the STM32F103C8T6 module, also known as the STM32 Blue Pill: • Serial and USB to TTL converter • ST-Link Tip Sometimes you might find out that the STM32 module you have is not original. And it can’t be programmed through serial. Therefore, we suggest you use ST-Link to program the STM32 Blue Pill. Required Materials Hardware Components STM32F103C8T6 Blue Pill × 1 ST-Link/V2 Programmer × 1 Male to Male Jumper Wire × 1 Software Apps Ar...

NanoPi NEO2 Features The NanoPi NEO2 quad-core board is a new ARM-based board equipped with a powerful H5 processor, Wi-Fi network, 512MB memory, and GPIO pins. It’s an affordable product that uses a 64-bit quad-core H5 Allwinner processor, which follows the ARM Cortex-A53 architecture and has an internal Hexa-core Mali-450 graphics processor. The board shares the same form and port compatibility as the Neo board. The NanoPi NEO2 quad-core board supports the operating system images of Ubuntu Core and ...

NanoPi Duo Board Features The NanoPi Duo Board functions like a compact computer, offering a range of features. Its main processor—Allwinner H2+—provides sufficient processing power through its Cortex-A7 quad-core processor. The board also comes with DDR3-type Memory available in two models: 256MB and 512MB.The NanoPi Duo board includes USB ports that allow you to connect peripherals such as a keyboard, mouse, storage device, or Wi-Fi dongle. In addition, you can connect the internal Ethernet port o...