Search results for: 'with a'

KY-037 Sound Sensor Module Features KY-037 module consists of a capacitive microphone and an amplifier circuit. The output of this module is both analog and digital. You can download the datasheet of this module here.[wpdm_package id='16686'] KY-037 Sound Module Pinout This module has 4 pins, 2 of them are for power supply. Pin 1: The analog output. It’s value changes according to the intensity of the received sound. It can be connected to the Arduino analog ...

ACS712 Current Module Features ACS712 chip is used to measuer DC/AC current based on the Hall effect. This chip is produced in 3 models with different maximum currents. Different models and output sensitivity of each model are shown in the table below: Sensor sensitivity means that, for example, if you use 5 amp model, as input current increase 1 amp, the output voltage of the sensor increases about 185 mV. Note When input is not connected to something and th...

DHT11 Sensor Features The DHT11 is a digital temperature and humidity sensor. This sensor is able to measure the humidity in the range of 20% to 80% with an accuracy of 5%. It can also measure the temperature in the range of 0 to 50 degrees Celsius with an accuracy of 2 degrees. Note The sampling frequency of this sensor is 1Hz. As a result, there must be at least one second between every readings of the sensor, otherwise the reading values will be incorrect. ...

FC-04 Sound Sensor Features This module consists of a capacitive microphone and an amplifier circuit. The output of this module is analog. This module can be used to measure ambient noise. You can adjust the accuracy of the sensor by using a variable resistor on the device. FC-04 Sound Module Pinout FC-04 module has 3 pins: VCC: Module power supply: 5 V GND: Ground OUT: Module output (Analog) You can see the pinout in the following image. Required Materials Hardware C...

Discover the capabilities of the ZMPT101B voltage sensor and learn how to interface it with Arduino for precise AC voltage measurement. This voltage transformer module allows you to measure AC voltages up to 250 volts with analog output. As the input voltage changes, the output voltage of the sensor adjusts accordingly. What is ZMPT101B Voltage Sensor? The ZMPT101B is a voltage transformer used to measure AC voltage. You can measure AC voltages up to 250 volts by using this module. The output of th...

HF43 Bluetooth Player Features The HF43B music player module consists of two parts: the HF43B Bluetooth receiver and the PAM8403 amplifier. The combination of these two pieces has resulted in a wireless player with an amplifier. This module uses the Bluetooth version 4. Software Apps HF43 Bluetooth Player Pinout HF43 module has 4 pins and one micro USB port: R+: Right speaker (positive) R-: Right speaker (negative) L+: Left speaker (positive) L-: Left speaker (negative) MicroUSB: Board ...

DS18B20 Temperature Sensor Features The DS18B20 is a temperature sensor that can measure temperature in the range of -55°C to + 125°C with an accuracy of 0.5 ° C. The output accuracy of this sensor is adjustable from 9 to 12 bits which is set to 12 bits by default. The communication protocol of the this sensor is single-wire, and to measure the ambient temperature  you only need to connect one wire to Arduino. Note One of the biggest advantages of this sensor is its one-wire communication protocol....

TEA5767 FM Radio Module Features The TEA5767 module is an FM radio receiver that can be connected to a microcontroller using the I2C protocol to search for radio stations. This module has a headphone output. You can download the TEA5767 FM Radio Module datasheet here. [wpdm_package id='16808'] TEA5767 FM Radio Module Pinout This Module has 4 pins:VCC: Module power supply - 5 VGND: GroundSLC: Synchronization for I2C protocolSDA: Data for I2C protocolYou can se...

YX6300 MP3 Player Features The YX6300 module is an MP3 player which is able to connect to a variety of microcontrollers and microprocessors. This module uses serial communication protocol. It can also support up to 32 GB of MicroSD memory. You can download the YX6300 MP3 player module datasheet here. [wpdm_package id='16827'] YX6300 MP3 Player Module Pinout YX6300 module has 4 pins: VCC: Module power supply - 5 V GND: Ground RX: Receive information through serial protocol TX: Sending i...

Active Buzzer Features A buzzer is a device used to produce sound. There are two types of buzzer: active and passive. In the active model, buzzer starts playing sound only if connected to a power supply, but in the passive model, we need to send a pulse from the microcontroller to play sounds.  The supply voltage of the buzzer is 3 volts, 5 volts and 12 volts.  You can download the active buzzer datasheet here. [wpdm_package id='16843'] Active Buzzer Module Pinout This Modu...