Search results for: 'sens'

TSL2561 Sensor Features The TSL2561 Luminosity Sensor Breakout is a complex light sensor which has a flat response across most of the visible spectrum range. This sensor is capable of direct I2C communication and is able to conduct specific light ranges from 0.1 - 40k+ Lux easily. You can download the datasheet of this module here. [wpdm_package id='17101'] TSL2561 Sensor Pinout This module has 2 pins: VCC: Module power supply - 5V GND: Ground  SLC: I2C clock  SDA: I2C ...

BH1750FVI Sensor Features BH1750FVI (or BH1750) is a calibrated digital light sensor IC that measures the incident light intensity and converts it into a 16-bit digital number. The BH1750FVI sensor directly gives digital output. The sensor output can be accessed through an I2C interface. It can measure ambient light intensity and the measurement unit is Lux. Interfacing this module with Arduino is quite easy. You can download the datasheet of this module here. [wpdm_package id='17132'] BH1750 ...

TCS3414CS Color Sensor Features TCS3414CS digital color sensor is based on TCS3414CS chip. It is designed to accurately derive the color chromaticity and illuminance (intensity) of ambient light. TCS3414CS color sensor provides a digital output I2C with 400kH speed. This sensor is able to detect different light spectra with high accuracy and speed. Note This module can’t detect the color of objects. It can only detect the reflected light spectra of objects. The higher the value of reflected l...

TCRT5000 Sensor Features The TCRT5000 Sensor is used to detect color and distance. The sensor emits an infrared wave and then receives it. TCRT5000 Infrared Reflective Sensor Module is often used in line following robots and object sorting Robots since this module can sense if a surface is white or black. The measuring distances range from 1mm to 8mm and the central point is about 2.5mm. There is also an onboard potentiometer to adjust the sensitivity. TCRT5000 Sensor Pinout This sensor has ...

Rain Drop Sensor Features The raindrop sensor module is used for rain detection. The module includes two parts. The first part is a printed circuit board that has a network of copper paths. When rain drops fall on this board, some parts of copper paths are connected to each other and the overall resistance of the board is reduced. The second part is a board converting analog output to digital output. The sensitivity of the sensor can be adjusted using the potentiometer on the board. Tip The raindrop sensor...