Search results for: 'rf 3'

R308 Biometric Fingerprint Module Features R308 biometric fingerprint module is a high-precision, high-performance matching algorithm and high-capacity flash chip. It works based on fingerprint image processing, matching, memory search and performing and desired functions. It uses serial communication in order to communicate with microcontroller. The default Baud Rate is 57600, and it is not possible to change it. This module can store up to 500 fingerprints. You can down...

R305 Optical Fingerprint Features R305 biometric fingerprint module is a high-precision, high-performance matching algorithm and high-capacity flash chip. It works based on fingerprint image processing, matching, memory search and performing and desired functions. R305 uses serial communication in order to communicate with microcontroller. The default Baud Rate is 57600, and it is not possible to change it. This module can store up to 980 fingerprints. It features a USB cable so you can...

MQ-135 Smoke Gas Sensor Module Features MQ series sensor uses a small heater inside with an electrochemical sensor in order to measure different kinds of gas combinations. The MQ-135 sensor is a sensor for detecting air quality. This sensor is able to detect smoke, CO2, ammonia, alcohol and benzene in the air. Note After turning on the module, wait for 2 minutes until the inside heater warms up. You can download the datasheet of this module here.[wpdm_package id=...

R301T Fingerprint Module Features This is an integrated fingerprint module with image collecting and algorithm chip together. It works in different conditions of the fingers, whether the fingers dry, wet, light texture, or old. It works in a variety of applications such as access control, safety deposit boxes. This fingerprint module communicates with the controllers with UART, Connect to any microcontroller or system with TTL serial, and sends packets of data to take photos, detect prints, hash, and se...

SHT30 Temperature & Humidity Sensor Features SHT30 is a digital temperature and humidity sensor. This module uses I2C communication and the 2 SCL and SDA pins are used to communicate with this sensor. This sensor is ideal for temperature and humidity sensing.  Temperature measurement range: 0°C to 65°C/ Accuracy ±0.3°C Humidity measurement range: 0-100% RH/ Accuracy ±3% RH You can download the datasheet of this module here...

SHT35 Temperature and Humidity Sensor Features SHT35 is a digital temperature and humidity sensor. This module uses I2C communication protocol and the 2 SCL and SDA pins are used in order to communicate to this sensor. This sensor is ideal for temperature and humidity sensing. Temperature measurement range: -40°C to 90°C/ Accuracy ±0.2°C  Humidity measurement range: 0-100% RH/ Accuracy ±1.5% RH You can download the datasheet of this module here. [wpdm_packag...

MAX30102 Heart Rate Module Features MAX30102 sensor is used to detect blood oxygen and heart rate. First, infrared radiation is sent and reflected by hitting the finger, and then the amount of oxygen in the blood is determined by measuring the wave amplitude. Heart rate is also obtained by analyzing the time series response of this radiation.The MAX30102 is an integrated module compatible with the Arduino and STM32. It integrates a red LED with an infrared LED, a photoelectric detector, an optical devi...

AP3216 Sensor Features The AP3216C is an integrated ALS & PS module that includes a digital ambient light sensor [ALS], a proximity sensor [PS], and an IR LED in a single package. This module is well suited to applications under clear glass or darkened glass. The proximity function is targeted specifically towards near field application and detects external object with simple configurable zone controlled by registers.  Note You need a 220 to 470 ohm resistor to interface this module. ...

3.5 INCH TFT DISPLAY Features This module is a 3.5-inch TFT LCD module with "320X480" resolution and 65K color display. It is suitable for Arduino Uno and Mega2560 development boards, and also supports SD card expansion function. It uses 8-bit parallel port communication, and the driver IC is ILI9486. You can download the datasheet of this module here. [wpdm_package id='19117'] 3.5 INCH TFT Display Pinout This module has 20 pins: 5V: Module power supply – 5 V 3.3V: Module power supply �...

TTP223 Capacitive Touch Sensor Features The TTP223 sensor can be used in a wide range of applications such as smartphones and tablets. It can also detect from behind glass and thin surfaces. When a finger touches the sensor, the module output gets HIGH, and immediately switches to LOW if not touched. The operating voltage is 2 to 5.5 V. Its maximum response time is 220 milliseconds. You can download the datsheet of this module here. [wpdm_package id='19196'] TTP223 Capacitive Touch Sensor...