Search results for: 'on arduin arduinos'

TM7711 24-bit Pressure Module Features The TM7711 is a 24-bit 2-channel analog-to-digital converter used to measure resistance changes. This module is widely used in load cell and air pressure sensors. This module features high accuracy, quality and cost-effectiveness. Note This module does not support I2C communication. You can download the datasheet of this module here. [wpdm_package id='18020'] TM7711 24-bit Pressure Module Pinout This sensor has 8 pins: VIN: Module power supply – 3.3-5...

DWM1000 Transceiver Module Features DWM1000 is an IEEE802.15.4-2011 UWB-compliant wireless transceiver module based on DecaWave’s DW1000 IC. DWM1000 measures location of objects using Real-Time Location Systems (RTLS) to a precision of 10cm indoors. This modules features a high data communication rate, up to 6.8 Mb/s, and has excellent communications range of up to 300m. It is also used in Wireless Sensor Networks (WSN). Tip You need at least 2 pieces of this sensor to use it. It is better ...

YwRobot Vibration Sensor Features Tilt sensors detect vibrations by having small metal spheres inside. You can use the generated signal to make an alarm if there is vibration. The output of this sensor is a digital signal. This Vibration Sensor is easy to interface with Arduino and you can use it to detect vibration. YwRobot Vibration Sensor Pinout This sensor has 4 pins:5V: Module power supply –2.4 V to 5 VGND: GroundOUT: OutputYou can see pinout of this module in...

YwRobot Vibration Motor Features This small built-in module uses a high-quality vibration motor. You can make some interesting Arduino projects such as an alarm, a notifier or even a vibrating robot! When the input is high, the motor will vibrate just like your cell phone. You can control the ON/OFF or vibration intensity through digital signal or PWM signal.The module adopts a high-quality mobile phone vibration motor; the vibration effect is evident; it is amplified and suitable as a non-audible indic...

Vibration Motor Module Features This small built-in module uses a high-quality vibration motor. You can make some interesting Arduino projects such as an alarm, a notifier or even a vibrating robot! When the input is high, the motor will vibrate just like your cell phone. You can control the ON/OFF or vibration intensity through digital signal or PWM signal. The module adopts a high-quality mobile phone vibration motor; the vibration effect is evident, it is amplified...

MicroDuino Touch Sensor Features This touch button is a simple digital output sensor. It uses the TTP223 chip to detect capacitance change. This sensor features small size, high sensitivity, long power consumption and long lifespan. When the sensor is touched, its output is LOW, otherwise it is HIGH. You can download the datsheet of this module here. [wpdm_package id='19221'] MicroDuino Touch Sensor Pinout This Module has 4 pins: VCC: Module power supply – 3.3 to 5 V GND: Ground OUT: ...

SR602 PIR Motion Detection Sensor Features PIR or Passive Infra-Red sensors detect motion based on infrared light of ambient heat. PIR sensors are commonly used in security alarms to detect the presence of human. The SR602 sensor is able to detect movement up to a distance of about 3 meters. This sensor has a digital output. When it detects motion, output will be High and it last 2.5 second. After that it returns to LOW. Note You can adjust sensitivity and HIGH time duration usin...

VNH2SP30 Monster Motor Shield Features Today, speed and direction control of DC motors is very common. These motors are widely used in manufacturing many tools and equipment. A full-bridge circuit is one of the simplest methods to control a DC motor. This method not only allows to control the motor direction, but can also be used for speed control. This shield contains a pair of VNH2SP30 full-bridge motor drivers. This driver has a higher current tolerance in compare to its similar drivers. This shield...

CJMCU-0201 Double Touch Sensor Features A touch sensor is a type of switch that only has to be touched by an object to operate. Touch sensors work completely similar to a switch. This sensor has two separate pads and can be used as two separate switches. Note When this switch is subjected to touch, the output voltage will be HIGH, otherwise it is LOW. Note The output current is very low (about 40 mA). If you want to connect a higher current device to this switch, you must add a rela...

WSN-03 Wireless Module Features This module features:Transmitting and receiving data over long distances (3.5 to 4 km)Operating frequency: 433, 470, 868 and 915 MHzData transfer sensitivity: 120dBmW (decibel-milliwatts)Receiving current: less than 30 mATransmitting current: less than 30 mAsleep mode current: less than 5 mA You can download the datasheet of this module here.[wpdm_package id='19515'] WSN-03 Wireless Module Pinout This Module has 8 pins:3V: Module ...