Search results for: 'module in'

NEO-7M GPS Module Features GY-NEO-7M module is an advanced GPS module that supports UART communication protocol with active antenna. You can interface this module easily with any microcontroller. This module has a rechargeable battery and can also be connected directly to a computer using a USB to TTL converter.This module can receive data and then calculate the geographical position with a very high accuracy and speed. In addition to supporting BeiDou, Galileo, GLONASS, GPS / QZSS, the module has inter...

NEO-8M GPS Module Features The GY-NEO-8M module is an advanced GPS module based on uBlox m8N that supports UART communication protocol with active antenna. You can interface this module easily with a microcontroller. This module has a rechargeable battery and can also be connected directly to a computer using a USB to TTL converter.NEO-8M can receive information and then calculate the geographical position with very high accuracy and fast speed. In addition to supporting BeiDou, Galileo, GLONASS, GPS / ...

NEO-6M GPS Module Features The GY-NEO-6M module is an advanced GPS module that supports UART communication protocol with active antenna. You can interface this module easily with any microcontroller. This module has a rechargeable battery and can also be connected directly to a computer using a USB to TTL converter. This module can receive information and then calculate the geographical position with very high accuracy and fast speed. In addition to supporting BeiDou, Galileo, GLONASS, GPS / QZSS, the modu...

DWM1000 Transceiver Module Features DWM1000 is an IEEE802.15.4-2011 UWB-compliant wireless transceiver module based on DecaWave’s DW1000 IC. DWM1000 measures location of objects using Real-Time Location Systems (RTLS) to a precision of 10cm indoors. This modules features a high data communication rate, up to 6.8 Mb/s, and has excellent communications range of up to 300m. It is also used in Wireless Sensor Networks (WSN). Tip You need at least 2 pieces of this sensor to use it. It is better ...

L298N DC Motor Driver Feature L298N module is used to drive DC motors with a current of less than 2 amps. This module is easy to use. It contains convenient filter circuit and have access to inputs and outputs via pin headers and terminals. The L298N is a dual full-bridge motor driver that allows two DC motors to be connected simultaneously. Note The L298N motor controller follows the H-bridge configuration, so it can be used to drive stepper motors too. This driver needs a logic voltage supply to drive t...

GP2Y1010AU0F Dust Module Features The GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. It is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems. You can download the datasheet of this module here.[wpdm_package id='18191'] ...

MQ-7 Smoke Gas Module Features MQ series sensor uses a small heater inside with an electrochemical sensor in order to measure a different kinds of gas combinations. They can be calibrated, but, in order to do that, a known concentration of measured gas or gases is needed. Gas sensor is an indoor module and is used at room temperature. The MQ-7 sensor has high sensitivity to Carbon Monoxide and is able to detect the concentration of carbon monoxide in the air. The measurable concentration range of this s...

MQ-8 Hydrogen Gas Sensor Features MQ series sensor uses a small heater inside with an electrochemical sensor in order to measure a different kind of gases combinations. They can be calibrated, but, in order to do that, a known concentration of measured gas or gases is needed. The MQ-8 hydrogen gas sensor is suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast response time.  Note ...

MQ-5 Smoke Gas Module Features MQ series sensor uses a small heater inside with an electrochemical sensor in order to measure a different kinds of gas combinations. This MQ-5 gas detector is used for leak detection of LPG  (Liquified Petroleum Gas), natural gas and city gas. It has low sensitivity to alcohol and smoke. Note After turning on the module, wait 2 minutes for the internal heater to warmp up. You can download the datasheet of this module here.[wpdm_...

MQ-4 Smoke Gas Module Features MQ series sensors use a small heater inside with an electrochemical sensor in order to measure different kinds of gases combination. This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. MQ-4 has a high switching speed, no noise when switching, and also has a long life. It has a low sensitivity to alcohol and smoke. The sensor normally has a zero output, and its output inc...