Search results for: 'interfacing'

What Is Reed Switch? The Reed Switch is a magnetic switch that has two (on and off) switching modes, like a normal switch. The two pins are connected to each other by being in a magnetic field (for example, close to the magnet) and are disconnected by leaving that field. These switches are used in open/close door detection sensors, seat belt sensors, collision detection sensors, etc. Tip Some magnetic switches are Normally Close. That is, when they are not in a magnetic field, the two pins are co...

KY-037 Sound Sensor Module Features KY-037 module consists of a capacitive microphone and an amplifier circuit. The output of this module is both analog and digital. You can download the datasheet of this module here.[wpdm_package id='16686'] KY-037 Sound Module Pinout This module has 4 pins, 2 of them are for power supply. Pin 1: The analog output. It’s value changes according to the intensity of the received sound. It can be connected to the Arduino analog ...

DHT11 Sensor Features The DHT11 is a digital temperature and humidity sensor. This sensor is able to measure the humidity in the range of 20% to 80% with an accuracy of 5%. It can also measure the temperature in the range of 0 to 50 degrees Celsius with an accuracy of 2 degrees. Note The sampling frequency of this sensor is 1Hz. As a result, there must be at least one second between every readings of the sensor, otherwise the reading values will be incorrect. ...

TEA5767 FM Radio Module Features The TEA5767 module is an FM radio receiver that can be connected to a microcontroller using the I2C protocol to search for radio stations. This module has a headphone output. You can download the TEA5767 FM Radio Module datasheet here. [wpdm_package id='16808'] TEA5767 FM Radio Module Pinout This Module has 4 pins:VCC: Module power supply - 5 VGND: GroundSLC: Synchronization for I2C protocolSDA: Data for I2C protocolYou can se...

YX6300 MP3 Player Features The YX6300 module is an MP3 player which is able to connect to a variety of microcontrollers and microprocessors. This module uses serial communication protocol. It can also support up to 32 GB of MicroSD memory. You can download the YX6300 MP3 player module datasheet here. [wpdm_package id='16827'] YX6300 MP3 Player Module Pinout YX6300 module has 4 pins: VCC: Module power supply - 5 V GND: Ground RX: Receive information through serial protocol TX: Sending i...

What is Reed Switch? Reed Switch is a magnetic switch that has two (on and off) switching modes, like a normal switch. The two pins are connected to each other by being in a magnetic field (for example, close to the magnet) and are disconnected by leaving that field.  These switches are used in open/close door detection sensors, seat belt sensors, collision detection sensors, etc.  Note Some magnetic switches are Normally Clo...

DHT11 Sensor Features The DHT11 is a digital temperature and humidity sensor. This sensor is able to measure the humidity in the range of 20% to 80% with an accuracy of 5%. It can also measure the temperature in the range of 0 to 50 degrees Celsius with an accuracy of 2 degrees. Note The sampling frequency of this sensor is 1Hz. As a result, there must be at least one second between every readings of the sensor, otherwise the reading values will be incorrect. ...

GP2Y0A02YK0F Infrared Sensor Features Sharp GP2Y0A02YK0F is an IR sensorusing infrared wave to measure distance. The output of the sensor is analog voltage, which can be read easily by ADC channel of the microcontroller. This sensor can be used in industry and especially in robotics. Sharp GP2Y0A02YK0F has an efficient range of 20 to 150cm. Note The sensor's output data would be incorrect at distances less than 20 cm and more than 150 cm. You can download the datasheet of this module here. [wpdm_p...

GP2Y0A41SK0F Infrared Sensor Features Sharp GP2Y0A41SK0F is an IR sensor that uses infrared wave to measure distance. The sensor’s output is analog, which can be easily read by microcontroller’s ADC converter. This sensor can be used in industry and especially in robotics. This sensor has an efficient range of 4cm to 30 cm. Note The sensor's accuracy will decrease at distances over 40cm. You can download the datasheet of this sensor here.[wpdm_package id='...

GP2Y0A51SK0F Infrared Sensor Features Sharp GP2Y0A51SK0F is an IR sensor that uses infrared wave to measure distance. The output of the sensor is analog voltage, which can be easily read by the microcontroller’s ADC converter. This sensor can be used in industry and especially in robotics. The efficient range of this module is 2 to 15 cm. Note At distances over 15cm, the sensor’s output is not accurate (usually shows higher than real value). You can download the datasheet of this module here...