Search results for: 'with'

MAX4466 Module Features The MAX4466 sensor is used to detect ambient sounds. This module has a built-in amplifier. Note The module output is not zero in silent mode and has 1.25V offset. MAX4466 Electret Microphone Pinout This sensor has 3 pins:VCC: Module power supply – 3-5.5 VGND: GroundOUT: Digital output data to the microcontrollerYou can see pinout of this module in the image below. You can download the datasheet of thi...

MPXV7002 Airspeed Module Features The MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional ...

Tilt Switch Sensor Features The function of this sensor is similar to a switch. There are 2 rolling ball inside the cylindrical housing of the sensor. Depending on how the two ball are positioned, the switch is connected and disconnected. Tilt Switch Sensor Pinout This sensor has 3 pins:VCC: Module power supply –3.3-5 VGND: GroundOUT: Digital outputYou can see pinout of this module in the image below. Required Materials ...

DWM1000 Transceiver Module Features DWM1000 is an IEEE802.15.4-2011 UWB-compliant wireless transceiver module based on DecaWave’s DW1000 IC. DWM1000 measures location of objects using Real-Time Location Systems (RTLS) to a precision of 10cm indoors. This modules features a high data communication rate, up to 6.8 Mb/s, and has excellent communications range of up to 300m. It is also used in Wireless Sensor Networks (WSN). Tip You need at least 2 pieces of this sensor to use it. It is better ...

R301T Fingerprint Module Features This is an integrated fingerprint module with image collecting and algorithm chip together. It works in different conditions of the fingers, whether the fingers dry, wet, light texture, or old. It works in a variety of applications such as access control, safety deposit boxes. This fingerprint module communicates with the controllers with UART, Connect to any microcontroller or system with TTL serial, and sends packets of data to take photos, detect prints, hash, and se...

YwRobot Vibration Sensor Features Tilt sensors detect vibrations by having small metal spheres inside. You can use the generated signal to make an alarm if there is vibration. The output of this sensor is a digital signal. This Vibration Sensor is easy to interface with Arduino and you can use it to detect vibration. YwRobot Vibration Sensor Pinout This sensor has 4 pins:5V: Module power supply –2.4 V to 5 VGND: GroundOUT: OutputYou can see pinout of this module in...

TTP223 Capacitive Touch Sensor Features The TTP223 sensor can be used in a wide range of applications such as smartphones and tablets. It can also detect from behind glass and thin surfaces. When a finger touches the sensor, the module output gets HIGH, and immediately switches to LOW if not touched. The operating voltage is 2 to 5.5 V. Its maximum response time is 220 milliseconds. You can download the datsheet of this module here. [wpdm_package id='19196'] TTP223 Capacitive Touch Sensor...

Overview Are you looking for a reliable temperature sensor? The MAX6675 Thermocouple Module is just what you need. With its exceptional features and seamless integration with Arduino, this module is perfect for measuring temperature accurately. In this article, we will explain the key features of the MAX6675 Thermocouple Module, provide step-by-step instructions for Arduino interfacing, and offer helpful tips for successful installation. MAX6675 Thermocouple Module Features This module is a temperature sens...

Touch Switch Module Features A touch sensor is a type of switch that needs to be touched by an object to operate. Touch sensors work completely similar to a switch. Note When this switch is touched, the output voltage will be HIGH, otherwise is LOW. Note The output current is very low (about 40 mA). If you want to connect a higher current device to this switch, you must add a relay or transistor to your circuit. Note There is a jumper on the board. If you change the status ...

TMP36 Temperature Sensor Features The TMP36 sensor is used to measure temperature from -40°C to +125°C and its tolerance threshold is +150°C. This sensor is calibrated directly on Celsius and its accuracy is 2°C. This sensor has an analog output. The output voltage changes linearly as the temperature changew. For example, the sensor output voltage is 0.75 volts at 25°C and 2.7 volts at 125°C.This sensor can be used in environmental control systems, thermal protection, fire alarms, CPU thermal m...