Search results for: 'so od'

SW-520D Tilt Sensor Module Featurs A SW-520D Tilt Sensor is an electronic device that detects the orientation of an object and gives its output High or Low accordingly. Basically, it has a metallic ball inside it which moves and makes the circuit. The sensor's sensitivity is at 10 degrees tilt. This module has two output pins for each path. When tilt angle is more than 10 degree, the output is low. Note The output is on trigger mode. You can download the datasheet of this module ...

MicroDuino Touch Sensor Features This touch button is a simple digital output sensor. It uses the TTP223 chip to detect capacitance change. This sensor features small size, high sensitivity, long power consumption and long lifespan. When the sensor is touched, its output is LOW, otherwise it is HIGH. You can download the datsheet of this module here. [wpdm_package id='19221'] MicroDuino Touch Sensor Pinout This Module has 4 pins: VCC: Module power supply – 3.3 to 5 V GND: Ground OUT: ...

Heart Rate Pulse Sensor Features Heart Rate Pulse Sensor can be used to measure the heart rate and some related parameters such as cardiac arrhythmia (i.e., abnormal heart rhythm). If you touch this sensor with any area of your skin that is closest to the arteries (such as the finger or earlobe), the sensor detects blood in the arteries. Each time the heart beats, blood is pumped through the arteries, and the sensor detects the flow of blood and increases the output voltage. Note This sensor has an analog o...

TLP281 4-Channel Opto-isolator IC Module Features Sometimes we need to separate the low-voltage section (microcontroller) from the high-voltage one in circuit in order to prevent noise and damage to the microcontroller. This module isolates the low-voltage section from the high-voltage section using TLP281-4 IC. This IC contains 4 LEDs (Light Emitting Diode). 4 high-voltage channels can be controlled by microcontroller using this IC.This module can also be used to turn on and off the servo motor and oth...

SI7021 Temperature and Humidity Sensor Features The SI7021 humidity and temperature sensor is a CMOS integrated sensor with I2C communication protocol. This sensor is factory calibrated and calibration data is stored in an on-chip non-volatile memory.This sensor is used in various applications such as thermostat and humidistats, respiratory therapy, Indoor weather stations, tablets, mobile phones, etc.Humidity measurement range: 0 to 100%RH - Accuracy 3%RHTemperature measuring range: -40°C to +125°C ...

SS49E Linear Hall Effect Sensor Features The output of SS49E linear Hall sensor provides an analog voltage representing if a magnetic field is present. So, this small and versatile sensor can be used in systems containing permanent magnets or an electromagnets in order to monitor magnetic field change. The output voltage is in the range of 2.25V to 2.75V. In this sensor, amplifier, voltage regulator and logic switching circuits are used to overcome noise in the output. SS49E Linear Hall Effe...

Interfacing AS608 Optical Fingerprint Sensor Module with Arduino provides a comprehensive guide on integrating the AS608 optical fingerprint sensor with Arduino for secure fingerprint scanning and identification. This step-by-step guide will walk you through the process of enrolling and verifying fingerprints using the AS608 module. Discover how to connect the module to Arduino, install the required library, and follow the enrollment and verification procedures. Get started on your fingerprint sensor projec...

SW-18010P Vibration Sensor Module Features The SW-18010P sensor is used to detect vibration. The sensor has a small spring inside a metal tube. When the sensor vibrates, the spring hits the metal tube and the sensor will be activated.This sensor has two digital and analog outputs. When the sensor vibrates, the digital output changes from HIGH to LOW and the analog output changes from 1023 to 0.Other features:Operating voltage: 3.3V to 5VIncluding a fixed hole on board for easy installationPotentiome...

GY-31 TCS3200 Color Sensor Features The TCS3200 color sensor uses 64 photodiodes to detect color. The output of this sensor is a square wave. Color intensity is obtained directly from the frequency of the square wave. These 64 photodiodes consist of 16 diodes with red filter, 16 diodes with green filter, 16 diodes with blue filter and 16 transparent photodiodes without filter. All 16 diodes of each type are connected in parallel. To detect any color, the photodiodes corresponding to that color are activ...