Search results for: 'modul in'

KY-031 Knock Module Features This module is a spring-based sensor that sends a HIGH signal when a vibration is detected. It can be widely used in security systems, or monitoring. You can easily use it with the Arduino board or any other microcontroller. Tip It is recommended to use microcontroller interrupt pins in order to increase accuracy. You can download the datasheet of this module here. [wpdm_package id='17426'] KY-031 Knock Module Pinout This sensor has 3 pins:  VIN: Module power...

MMA7361 Accelerometer Module Features The MMA7361 is a 3-axis accelerometer with ± 1.5g to ± 6g measuring range. You do not need a library and complex code to use MMA7361 accelerometer. In this module, there is an analog output voltage for each axis acceleration. As a result, you can read and analyze sensor's outputs using an analog-to-digital converter. You can download the datasheet of this module here. [wpdm_package id='17442'] The output voltage for each axis of this module is as follows...

BME280 Module Features The BOSCH BME280 is a small-size, high accuracy barometric pressure module. Its small dimensions and low power consumption makes it a suitable choice for mobile phones, GPS modules and smart watches. BME280 technology is based on piezoelectric pressure and has a high accuracy, linearity and high stability and durability. In this tutorial, you will learn how to interface this module using I2C protocol. You can download the datasheet of this module here. [wpdm_package...

PCF8591 AD/DA Features The PCF8591 is a single-chip, single-supply low power 8-bit CMOS data acquisition device. This chip has four analog inputs, one analog output, and a serial I2C-bus interface.The PCF8591 module has 4 pins on the left, which include the power pins and the I2C connection pins. The 8 right pins with 4 jumpers on them also work with signals: AOUT: Module DAC output interface AINO: chip analog input interface AIN1: chip analog input interface AIN2: chip analog input interface AIN3:...

WS2812 - LED RGB Module Features This is a breakout board for the WS2812B RGB LED. The WS2812B (or NeoPixel) is actually an RGB LED with a WS2811 built right into the LED! This module has a 5mm RGB LED on it, which has the ability to create 16777216 colors. WS2812 RGB Module Pinout This module has 4 pins: VCC: Module power supply - 5 V GND: Ground DI: Input data from the previous micro or module DO: Output data to next moduleYou can see pinout of this module in t...

MAX4466 Module Features The MAX4466 sensor is used to detect ambient sounds. This module has a built-in amplifier. Note The module output is not zero in silent mode and has 1.25V offset. MAX4466 Electret Microphone Pinout This sensor has 3 pins:VCC: Module power supply – 3-5.5 VGND: GroundOUT: Digital output data to the microcontrollerYou can see pinout of this module in the image below. You can download the datasheet of thi...

R305 Optical Fingerprint Features R305 biometric fingerprint module is a high-precision, high-performance matching algorithm and high-capacity flash chip. It works based on fingerprint image processing, matching, memory search and performing and desired functions. R305 uses serial communication in order to communicate with microcontroller. The default Baud Rate is 57600, and it is not possible to change it. This module can store up to 980 fingerprints. It features a USB cable so you can...

Load Cell Sensor Features Load cells are electronic sensors that are able to measure weight and force. The body is usually made of aluminum, alloy steel, or stainless steel which makes it very sturdy but also minimally elastic. This elasticity gives rise to the term "spring element", referring to the body of the load cell. When force is exerted on the load cell, the spring element is slightly deformed, and unless overloaded, always returns to its original shape. Load cell capacity is equal to the maximum am...

MPU9250 + BMP280 Module Features This IMU module is a small board which all the sensors required for 10 degrees of freedom are placed in. This module communicates with the Arduino or microcontrollers via the I2C interface. Using the existing FreeIMU functions and source code, you can easily use this IMU as an AHRS system in flight controls. You can use this module in VTOLs, model airplanes, UAVS, and also industrial and medical devices. GY-91 Module Pinout This s...