Search results for: 'drive'

L9110S Dual-Channel Driver Module Features Motor driver modules are very common nowadays and widely used to control the speed and direction of motors. The L9110S dual-channel module is one of them. This module can control two DC motors and one stepper motor. It is based on L9110 IC. The key features are: The allowable continuous current for each channel: 800 mA The maximum allowable current: 1.5 A Power supply: 2.5V to 12V Note The two connected pins to each DC motor can be PWM or digital. If define...

Learn how to interface the BTS7960 43A high-power motor driver module with Arduino. This guide covers the key features of the BTS7960 motor driver, its pinout configuration, and provides step-by-step instructions for circuit connection and code implementation. Take control of your motors with this versatile and powerful motor driver. BTS7960 43A Motor Driver Features The BTS7960 is a high-current full-bridge motor driver module. The Key features are: Input voltage: 6V to 27V Maximum allowable current: ...

ULN2003 Stepper Motor Driver Features We usually use stepper motors when we need precise control of the motor shaft. These motors can be used in robot arm, 3D printers, CNC machines, etc. 28BJY-48 is a kind of stepper motor. In full step mode, these motors have a 1 to 64 speed reduction gearbox and eachfull 360 degree rotation consists of 32 steps. The ULN2003 driver is commonly used to control these motors. ULN2003 IC consists of 7 pairs of Darlington transistors, each pair can withstand 500mA and 50V. Th...

DRV8833 Dual Motor Driver Features Today, speed and direction control of DC motors is very important and useful. The H-bridge circuit is one of the most common techniques to control a DC motor. The DRV8833 dual-channel module uses this technique to control two DC motors.This dual H-bridge motor driver can drive two DC motors, a stepper motor or other inductive loads.The driver supply voltage is 2.7 to 10.8V and the allowable continuous current is 1.5A and the maximum allowable current is 2A.Some common...

A4988 Stepper Motor Driver Features The A4988 stepper motor driver is intended to drive a bipolar stepper motor. Only by two pins, you can control the rotation direction and rotation steps. Each signal sent by the spin step pin, the motor rotates one step. The key features are:This driver has 200 steps per revolution in full step (1.8 degrees per step).Allowable continuous current per phase without cooling: 1AMaximum current per phase with cooling: 2AMotor voltage: 8 to 35 VThe minimum allowed pulse�...