Search results for: 'as an'

VL53L0X Distance Sensor Features The VL53L0X sensor is a laser rangefinder. First, the sensor sends a laser pulse, and the distance from object to the sensor is estimated by measuring the travel time of the laser pulse. Due to the very high speed of light, this sensor is not used in applications less than a millimeter. This module can measure a maximum distance of 2 meters. The operating voltage is 2.8 to 5 volts and it uses the I2C protocol to communicate with the microcontroller. You can down...

KY-008 Laser Transmitter Module Features This Laser module emits a small intense focused beam of visible red light.  The operating voltage is 3-5 V and the required current is 40mA. Note Since the required current is 40 mA and the Arduino pins can supply this current, this module can be connected directly to Arduino. If need be more than 40mA, direct connection to Arduino will damage the Arduino. In that case, you need to use a laser driver to connect the laser module to Arduino. ...

SR04 Ultrasonic Sensor Features The SRF04 ultrasonic distance sensor can be used to measure distance with high accuracy. The basic working principle of this sensor is that it produces a high-level signal and sends it to the obstacle. Then the receiver detects the returned wave. The time between the transmission and reception of the signal allows us to calculate the distance to an object. Note When the Trig pin is set High, the sensor generates and sends ultrasonic sound. At that moment the Ech...