Search results for: 'arduino mi arduino'
Page
- Page Previous
- Page 1
- Page 2
- You're currently reading page 3
- Page 4
- Page Next
Show
per page
-
SI7021 Temperature and Humidity Sensor Features The SI7021 humidity and temperature sensor is a CMOS integrated sensor with I2C communication protocol. This sensor is factory calibrated and calibration data is stored in an on-chip non-volatile memory.This sensor is used in various applications such as thermostat and humidistats, respiratory therapy, Indoor weather stations, tablets, mobile phones, etc.Humidity measurement range: 0 to 100%RH - Accuracy 3%RHTemperature measuring range: -40°C to +125°C ...
-
KY-008 Laser Transmitter Module Features This Laser module emits a small intense focused beam of visible red light. The operating voltage is 3-5 V and the required current is 40mA. Note Since the required current is 40 mA and the Arduino pins can supply this current, this module can be connected directly to Arduino. If need be more than 40mA, direct connection to Arduino will damage the Arduino. In that case, you need to use a laser driver to connect the laser module to Arduino. ...
-
DHT22 Temperature Humidity Sensor Features The DHT22 Temperature Humidity Sensor is a great choice for measuring ambient temperature and humidity. This sensor consists of a capacitive humidity sensor and a heat resistor. The DHT22 sensor has a wide range of temperature and humidity measurement. It can measure temperature in range of -40 to +125 degrees Celsius with 0.5 degrees Celsius accuracy. Humidity is measured in range of 0 to 100% with 2.5% accuracy. This sensor transmits data through a single di...
-
SHT10 Temperature Humidity Sensor Features The SHT10 module is a high accuracy sensor for measuring temperature and humidity. This module can be easily connected to a variety of microcontrollers using two digital output pins. One for data transfer and the other for adjusting data transfer speed between the module and the microcontroller. The range of temperature measurement is -40 to +123.8 degrees Celsius with 0.01 degrees Celsius accuracy. The humidity range is 0 to 100% with 0.05% accuracy. This module i...
-
SHT31 Temperature Humidity Sensor Features The SHT31 sensor module is a temperature and humidity sensor with high accuracy and quick response time. Specifications: Temperature measurement range: -40 to +90 degrees Celsius Temperature measurement accuracy: 3 degrees Celsius Humidity measurement range: 0 - 100% RH Humidity measurement accuracy: 2% RH Communication protocol: I2C Data transition: up to 1MHz frequency Address pin included: To adjust I2C protocol address ...
-
DHT21/AM2301 Temperature and Humidity Sensor Features The AM2301 / DHT21 temperature and humidity sensor consists of two sensors: A capacitive humidity sensor and a thermistor. This sensor transmits data using a single digital pin, so it can communicate with the microcontroller using only one digital pin. The sampling frequency is 0.5Hz, which means that you can get new data every two seconds. DHT21/AM2301 Temperature and Humidity Sensor Pinout This Module has 3 w...
-
BME280 Sensor Module Features The BME280 sensor module is a high-accuracy module for measuring temperature, humidity and atmospheric pressure. The key features are:Temperature Measuring range: -40 to +80 degrees Celsius; Accuracy: 1 degree Celsius In the range of 0 to +65 and 1.5 degrees Celsius out of this rangehumidity: 0-100%RH; Accuracy: 3%RH.pressure: 330hPa to 1100hPa. Accuracy: 1hPaThis module also calculates altitude indirectly using atmospheric pressure. The communication protocol of this sens...
-
HW-M10 Microwave Sensor Module Features The HW-M10 microwave sensor module is very accurate and widely used for motion detection in alarm and security systems. This module, like the PIR module, can detect any movement. The only difference is that instead of using radiation emitted by or reflected from objects, it uses microwave Doppler radar technology. This module has a digital output that is normally Low and becomes High (3.3V) if it detects motion and remains High for 2 to 3 seconds. ...
-
MTH02 Temperature and Humidity Sensor Features There are various types of temperature and humidity sensors on the market in terms of price, accuracy and measurement range. The MTH02O is one the smallest type of these sensors. This sensor uses a digital pin to transfer the temperature and humidity data.Features:Low power consumptionSmall sizetemperature Measurement range: -40°C to +70°C with 0.5°C accuracyHumidity range: 18% to 98% with 3% accuracyApplication:HVACConsumer ProductsTesting and measur...
-
Wirelessly connecting electronic devices is often necessary, and Radio Frequency (RF) equipment serves this purpose. RF modules enable communication using radio waves of varying frequencies and amplitudes, allowing information to be transmitted to the receiver over different distances. 315/433 MHz RF Transmitter-Receiver Module Features The 315/433 MHz RF transmitter-receiver module is designed to operate at 433MHz and 315MHz frequencies. It consists of a transmitter and a receiver, making it ideal for wire...
Page
- Page Previous
- Page 1
- Page 2
- You're currently reading page 3
- Page 4
- Page Next
Show
per page

Please complete your information below to login.
Sign In
Create New Account