Search results for: 'with'

4 Channel Infrared Module Features This module has 4 IR transmitter and receiver pairs that can be used to detect black and white color as well as obstacles. Each channel has digital voltage output. You can adjust the sensor’s sensitivity using the on board potentiometers. Pinout You can see pinout of IR module in the image below. Required Materials Hardware Components Arduino UNO R3 × 1 4 Channel IR Obstacle Avoidance Proximity Module × 1 Male to Male jumper wir...

YZC-161B Load Cell Sensor Features Load cells are electronic sensors used for measuring weight and force. Load cells are made of alloy and a number of tensile strengths. When force is on the load cell, the spring element is slightly deformed, and unless overloaded, always returns to its original shape. The capacity of a load cell is the maximum amount of force it can withstand. Notes To measure tensile strength changes, we use the HX711 module. It is a high-precision analog-to-digital converter...

YF-S201 Water Flow Sensor Features YF-S201 is a sensor used to measure the water flow. This water flow sensor mainly consists of a plastic valve body, rotor assembly, and a hall effect sensor. This module works based on the hall magnetic effect. So when the water flows through the rotor assembly, the rotor will rotate and the hall effect sensor will produce an electric pulse. By counting these generated pulses, the amount of water passing through the sensor can be calculated.The measuring range of wat...

MAX30102 Heart Rate Module Features MAX30102 sensor is used to detect blood oxygen and heart rate. First, infrared radiation is sent and reflected by hitting the finger, and then the amount of oxygen in the blood is determined by measuring the wave amplitude. Heart rate is also obtained by analyzing the time series response of this radiation.The MAX30102 is an integrated module compatible with the Arduino and STM32. It integrates a red LED with an infrared LED, a photoelectric detector, an optical devi...

AP3216 Sensor Features The AP3216C is an integrated ALS & PS module that includes a digital ambient light sensor [ALS], a proximity sensor [PS], and an IR LED in a single package. This module is well suited to applications under clear glass or darkened glass. The proximity function is targeted specifically towards near field application and detects external object with simple configurable zone controlled by registers.  Note You need a 220 to 470 ohm resistor to interface this module. ...

Grove Touch Sensor Features This sensor uses TTP223-B IC. When your finger approaches this sensor, the capacitance of the metal surface will change. So you don’t need to touch sensor completely. Besides, you can put this sensor under a non-metallic surface and touch it. This sensor is waterproof, and it has a variety of applications.  Note There are two red and black wire that have been connected to this sensor. If you want to increase the fingerprint sensitivity, you can remove the black w...

2.4 INCH TFT DISPLAY Features This module is a 2.4-inch TFT LCD module with "320X240" resolution and 65K color display. It is suitable for Arduino Uno and Mega2560 development boards, and also supports SD card expansion function. It uses 8-bit parallel port communication, and the driver IC is ILI9341. You can download the datasheet of this module here. [wpdm_package id='19103'] 2.4 INCH TFT Display Pinout This module has 20 pins:5V: Module power supply – ...

OE-TP Light Touch Switch Module Features This module has a fingerprint sensor that can control the digital output voltage. So The output voltage will change with each touch. The operating voltage is 5 to 20 V (recommended 12 volts) and operating current is up to 3 A (peak 10 A). It also has two red and blue LEDs. The blue LED indicates the module is powered on and the red LED indicates touch detection.This type of sensor is widely used in home lighting, motor speed control, toys, etc. ...

E18-D80NK Infrared Obstacle Avoidance Sensor Features The E18-D80NK sensor is used to detect obstacles and objects. This sensor works based on transmitting infrared rays. First, the transmitter sends the rays in a direct path. This ray hits the obstacle and returns to the receiver. There is a potentiometer on this module that can be adjusted to change this detection distance from 3 to 80cm. In fact, with this sensor, the obstacle can be detected, but the distance cannot be calculated directly. There is also...

L298P Motor Driver Shield Features Today, DC motors are used in the manufacturing many tools and equipments. So, speed and direction control of these motors is very common. A half-bridge circuit is one of the simplest methods to control a DC motor. This method not only controls the motor direction, but also can be used for speed control. This shield is based on L298P IC. The most important features are: Control two DC motors simultaneously with voltage 4.8 to 24V and up to 2A current Schottky diodes ...