Search results for: 'arduinos'

RXB35 RF Receiver Module Features Electronic devices need to be connected wirelessly in so many cases. In these cases, Radio Frequency or RF equipments are used. RF modules include all radio waves that can travel different distances and reach the receiver according to their frequency and amplitude.The RXB35 module is only produced at 433MHz. Note All modules that use the 315/433MHz frequency band can communicate with each other and there is no information security in this type of communicatio...

H3V4F RF Receiver Module Features Electronic devices need to be connected wirelessly in so many cases. In these cases, Radio Frequency or RF equipments are used. RF modules include all radio waves that can travel different distances and reach the receiver according to their frequency and amplitude.This module is only produced at 433MHz. Note All modules that use the 315/433MHz frequency band can communicate with each other and there is no information security in this type of communication. If...

SHT20 Temperature and Humidity Sensor Features The SHT20 temperature and humidity module is high-precious, full calibrated, with very low power consumption and high response speed. This sensor is a combination of a capacitive humidity sensor and a silicon band gap temperature sensor. The key features are:Temperature measurement range: -40 to +125 °CTemperature measurement accuracy: 0.3 °CHumidity measurement range: 0 to 100%Humidity measurement accuracy: 3% RHCommunication Protocol: I2C ...

MTH01 Temperature and Humidity Sensor Features The MTH01 sensor module is a suitable sensor for measuring ambient temperature and humidity. This module actually consists of two sensors: an NTC type high precision temperature sensor and a resistive type relative humidity sensor. It can communicate to different microcontrollers through SPI interface. The key features of this module are:Temperature measurement range: -40 to +70 degrees CelsiusTemperature measurement accuracy: 0.5 degrees CelsiusHumidity m...

ADS1118 16-Bit ADC Module Features Almost all microcontrollers come with ADC pins, but they lack high precision. In a lot of projects, analog values need to be measured with high accuracy, or the voltage level of the measured signal is not within the microcontroller measurement range, or even the microcontroller used doesn’t have an ADC pin. In such cases, analog to digital converter modules are used.ADS1118 module is an analog to digital converter module that has 16-bit precision and can measure a ma...

Overview Sometimes in electronic projects, you need to use two or more microcontrollers in your circuit at the same time. Normally, these microcontrollers are connected to each other and keep transmitting data with one another. The transmitting of data between two or more microcontrollers can be done with several communication protocols such as SPI, UART, CAN, USB, etc. Another one which we will be covering here in this tutorial is I2C (Inter-Integrated Circuit) protocol. Using this protocol, one of the mi...

What is ADXL375 Accelerometer Module? The ADXL375 module is an ultra-accurate 3-axis accelerometer sensor. This accelerometer can measure up to 200 g of force in three axes (X Y Z) (g: the gravity acceleration, which is around 9.8 meters per square second. In simpler words: nearby the acceleration of a spaceship rocket!!!)Other useful features: I2C and SPI interfaces for communication as well as two interrupt pins that can be configured independently.ADXL375 is an advanced version of ADXL345 and ADXL343...

Introduction Are you looking to enhance your smart and security systems? Want to create projects that detect motion and automate your home? Look no further!  Introducing the HW-MS03 motion detection module, a powerful radar sensor that can revolutionize your projects. Whether you want to secure your premises, automate lighting systems, or develop cutting-edge applications, this module is your key to unlocking endless possibilities.The basic task of these sensors, as you can guess by their name, is to ...

Overview There are two main ways to program the STM32F103C8T6 module, also known as the STM32 Blue Pill: • Serial and USB to TTL converter • ST-Link Tip Sometimes you might find out that the STM32 module you have is not original. And it can’t be programmed through serial. Therefore, we suggest you use ST-Link to program the STM32 Blue Pill. Required Materials Hardware Components STM32F103C8T6 Blue Pill × 1 ST-Link/V2 Programmer × 1 Male to Male Jumper Wire × 1 Software Apps Ar...

Introduction The KY-028 module contains a thermistor sensor that measures the ambient temperature. The resistance of the thermistor varies inversely with temperature. In addition, the analog and digital output pins provide the sensor's data. When the value measured by the sensor exceeds the threshold, the digital pin goes HIGH, lighting up the LED on the module. Tip You can adjust the digital output threshold using the blue potentiometer on the module. KY-028 Pi...