Search results for: 'arduino e'

TTP229 Capacitive Touch Keypad Features Keypads are one of the most popular components that are widely used in electronics. Everybody can communicate with different systems by switches. Normally, every key occupies one digital pin of the microcontroller. But by using a 4x4 keypad you can reduce the occupied pins. With this module, you can use all 16 switches by occupying only 2 pins of the microcontroller. This 16 key capacitive touch keypad is based on the TTP229 IC. Output pins 1 to 8 are for direct swit...

Dual-Axis Joystick Shield Features The dual-axis joystick shield is commonly used in robotics and game consoles. This module includes a 2-Axis joystick, 4 large buttons, 2 small buttons and a number of pins to connect to other components.The key features of this joystick are:A joystick in both X and Y directions4 buttons with plastic cover in 4 different directions2 separate small buttonsSerial / Bluetooth interfaceI2C interfacenRF24L01 interfaceConnection pins to nRF24L01 moduleNokia 5110 LCD interfac...

PCF8563 RTC Module Features The PCF8563 real time clock module features high accuracy and low power consumption. This RTC maintains seconds, minutes, hours, day, date, month, and year information. In this module, the date is set based on whether the month is 29, 30 or 31 days and also it is leap year or not. This module can also be used in 12-hour and 24-hour formats. DS3231 RTC Module Pinout This module has 6 pins:INT: interrupt outputCOT: Clock outputSCL: Seria...

PS2 Joystick Module Features This module consist of two joysticks and two independent buttons. The joystick is very useful in robotics. Each joystick has two potentiometers on two X and Y axes and one push button. This module has two analog outputs and one digital output. In robotics, it can be used to control moving parts and motors. How it works This module contain two potentiometers in both X and Y axis. As shown below, the joystick is normally in the ...

2.0 INCH TFT DISPLAY Features This module is a 2-inch TFT LCD module with "220x176" resolution and 65K color display. It is suitable for Arduino Uno and Mega2560 development boards, and also supports SD card expansion function. The driver IC is ILI9225. You can download the datasheet of this module here.  [wpdm_package id='19870'] 2.0 INCH TFT Display Pinout This module has 8 pins:5V: Module power supply – 5VGND: GroundLCD_RST: LCD resetLCD_CS: LCD sele...

0.95 INCH OLED Display Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels. So it is thinner, and more elegant in compare to LCDs.This 0.95-inch colorful OLED is graphic type, the resolution is 96x64 pixels and the chip driver is SSD1331. You can download the datasheet of this module here.  [wpdm_package id='19883'] 0.95 INC...

0.96 INCH I2C/SPI OLED Display Module Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels. So, it is thinner, and more elegant in compare to LCDs. The driver chip is SSD1306, which provides I2C/SPI communication. You can download the datasheet of this module here.  [wpdm_package id='19894'] 0.96 INCH OLED Display Module Pino...

1.3 INCH OLED Display Module Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels. So, it is thinner, and more elegant in compare to LCDs. The driver chip is SH1106, which provides I2C/SPI communication. You can download the datasheet of this module here.  [wpdm_package id='19917'] 1.3 INCH OLED Display Module Pinout This...

KY-008 Laser Transmitter Module Features This Laser module emits a small intense focused beam of visible red light.  The operating voltage is 3-5 V and the required current is 40mA. Note Since the required current is 40 mA and the Arduino pins can supply this current, this module can be connected directly to Arduino. If need be more than 40mA, direct connection to Arduino will damage the Arduino. In that case, you need to use a laser driver to connect the laser module to Arduino. ...

L9110 Dual Channel Driver Module Features Motor driver modules are very common nowadays and widely used to control the speed and direction of motors. The L9110S dual channel module is one of them. This module can control two DC motors and one stepper motor. It is based on L9110 IC. The key features are:The allowable continuous current for each channel:  800mA.The operating voltage: 2.5 - 12V.Two control pins for each DC motor.Suitable for toy cars motors.Can control one stepper motor. ...