Search results for: 'sensors arduinos'

DS18B20 Temperature Sensor Features The DS18B20 is a temperature sensor that can measure temperature in the range of -55°C to + 125°C with an accuracy of 0.5 ° C. The output accuracy of this sensor is adjustable from 9 to 12 bits which is set to 12 bits by default. The communication protocol of the this sensor is single-wire, and to measure the ambient temperature  you only need to connect one wire to Arduino. Note One of the biggest advantages of this sensor is its one-wire communication protocol....

GP2Y0A21YK0F Infrared Sensor Features Sharp GP2Y0A21YK0F is an IR sensor useing infrared wave to measure distance. The output of the sensor is analog voltage, which can be read easily by microcontroller’s ADC converter. This sensor can be used in industry and especially in robotics. The efficient range of this module is 10 to 80 cm. Note This module’s data is incorret at distances of less than 10 cm and more than 80 cm. You can download the datasheet of this sensor here.  [wpdm_package ...

DHT11 Sensor Features The DHT11 is a digital temperature and humidity sensor. This sensor is able to measure the humidity in the range of 20% to 80% with an accuracy of 5%. It can also measure the temperature in the range of 0 to 50 degrees Celsius with an accuracy of 2 degrees. Note The sampling frequency of this sensor is 1Hz. As a result, there must be at least one second between every readings of the sensor, otherwise the reading values will be incorrect. ...

GP2Y0A02YK0F Infrared Sensor Features Sharp GP2Y0A02YK0F is an IR sensorusing infrared wave to measure distance. The output of the sensor is analog voltage, which can be read easily by ADC channel of the microcontroller. This sensor can be used in industry and especially in robotics. Sharp GP2Y0A02YK0F has an efficient range of 20 to 150cm. Note The sensor's output data would be incorrect at distances less than 20 cm and more than 150 cm. You can download the datasheet of this module here. [wpdm_p...

GP2Y0A41SK0F Infrared Sensor Features Sharp GP2Y0A41SK0F is an IR sensor that uses infrared wave to measure distance. The sensor’s output is analog, which can be easily read by microcontroller’s ADC converter. This sensor can be used in industry and especially in robotics. This sensor has an efficient range of 4cm to 30 cm. Note The sensor's accuracy will decrease at distances over 40cm. You can download the datasheet of this sensor here.[wpdm_package id='...

GP2Y0A51SK0F Infrared Sensor Features Sharp GP2Y0A51SK0F is an IR sensor that uses infrared wave to measure distance. The output of the sensor is analog voltage, which can be easily read by the microcontroller’s ADC converter. This sensor can be used in industry and especially in robotics. The efficient range of this module is 2 to 15 cm. Note At distances over 15cm, the sensor’s output is not accurate (usually shows higher than real value). You can download the datasheet of this module here...

Photoresistor Sensor Features Photoresistor is a kind of resistor that is sensitive to light. The resistance value changes by change of light intensity. As the ambient light increases, the photoresistor resistance decreases and with decreasing light, the resistance increases. The output characteristic of this sensor is nonlinear. You can download the datasheet of this module here. [wpdm_package id='17061'] LDR Photoresistor Sensor Pinout This module has 2 pins: VCC: Sensor’s power supply - 5V...

TSL2561 Sensor Features The TSL2561 Luminosity Sensor Breakout is a complex light sensor which has a flat response across most of the visible spectrum range. This sensor is capable of direct I2C communication and is able to conduct specific light ranges from 0.1 - 40k+ Lux easily. You can download the datasheet of this module here. [wpdm_package id='17101'] TSL2561 Sensor Pinout This module has 2 pins: VCC: Module power supply - 5V GND: Ground  SLC: I2C clock  SDA: I2C ...

BH1750FVI Sensor Features BH1750FVI (or BH1750) is a calibrated digital light sensor IC that measures the incident light intensity and converts it into a 16-bit digital number. The BH1750FVI sensor directly gives digital output. The sensor output can be accessed through an I2C interface. It can measure ambient light intensity and the measurement unit is Lux. Interfacing this module with Arduino is quite easy. You can download the datasheet of this module here. [wpdm_package id='17132'] BH1750 ...

TCS3414CS Color Sensor Features TCS3414CS digital color sensor is based on TCS3414CS chip. It is designed to accurately derive the color chromaticity and illuminance (intensity) of ambient light. TCS3414CS color sensor provides a digital output I2C with 400kH speed. This sensor is able to detect different light spectra with high accuracy and speed. Note This module can’t detect the color of objects. It can only detect the reflected light spectra of objects. The higher the value of reflected l...