Search results for: 'no a is'

GP2Y0A51SK0F Infrared Sensor Features Sharp GP2Y0A51SK0F is an IR sensor that uses infrared wave to measure distance. The output of the sensor is analog voltage, which can be easily read by the microcontroller’s ADC converter. This sensor can be used in industry and especially in robotics. The efficient range of this module is 2 to 15 cm. Note At distances over 15cm, the sensor’s output is not accurate (usually shows higher than real value). You can download the datasheet of this module here...

Photoresistor Sensor Features Photoresistor is a kind of resistor that is sensitive to light. The resistance value changes by change of light intensity. As the ambient light increases, the photoresistor resistance decreases and with decreasing light, the resistance increases. The output characteristic of this sensor is nonlinear. You can download the datasheet of this module here. [wpdm_package id='17061'] LDR Photoresistor Sensor Pinout This module has 2 pins: VCC: Sensor’s power supply - 5V...

SRF05 Ultrasonic Module Features SRF05 is an ultrasonic transmitter and receiver module used to measure distance. The sensor operation is very simple. You only need to measure the return time of ultrasonic waves in order to measure the distance. Then you should divide measured time by 2 and multiply by the sound speed. The sensor measuring range is about 2 to 400 cm. You can download the datasheet of this module here. [wpdm_package id='17336'] SRF05 Ultrasonic Module Pinout This sensor has 3 pi...

MPU9250 + BMP280 Module Features This module combines a 9-axis MPU8250 IMU and a BMP180 atmospheric pressure sensor. Therefore you have a 10DOF sensor in one place! It can communicate with arduino or any other microcontroller via I2C protocol. Using FreeIMU functions and source code, you can easily build an AHRS system to use in UAVs, VTOLs, model airplanes, etc. You can also use it in industrial, medical, ... devices. MPU9250 + BMP280 Module Pinout This sensor ha...

US-100 Distance Sensor Features The US-100 is an ultrasonic transmitter and receiver module used to measure distance. The sensor operation is very simple. You only need to measure the return time of ultrasonic waves in order to measure the distance. Then you can divide this time by 2 and multiplied by the sound speed. The sensor measuring range is about 2 to 450 cm. Note The US-100 module has 2 different communication protocol. Method 1: use serial communication Method 2: use Trigger and Echo (similar to ...

MPU9250 + BMP280 Module Features This IMU module is a small board which all the sensors required for 10 degrees of freedom are placed in. This module communicates with the Arduino or microcontrollers via the I2C interface. Using the existing FreeIMU functions and source code, you can easily use this IMU as an AHRS system in flight controls. You can use this module in VTOLs, model airplanes, UAVS, and also industrial and medical devices. GY-91 Module Pinout This s...

GY-521 MPU6050 Features The GY-521 is based on the MPU6050 sensor that contains both a 3-Axis Gyroscope and a 3-Axis accelerometer. It uses I2C communication protocol and you can read MPU6050 outputs with SCL and SDA pins. Note The MPU6050 sensor has a digital thermometer in addition to the gyroscope and accelerometer. You can download the datasheet of this module here.[wpdm_package id='18153'] GY-521 MPU6050 Sensor Pinout This sensor has 8 pins:VCC: Mod...

FSR-402 Force Sensitive Resistor Features Force-sensitive resistors are simple sensors for detecting weight and force. That’s why they are called Force Sensing Resistor or FSR. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. Put this sensor in the circuit like other resistors to get the output. When no pressure is being applied to the FSR, its resistance will be maximum or infinitive. This is a force se...

0.91 INCH OLED DISPLAY Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels, so, it is thinner, and more elegant in compare to LCDs. The driver chip is SSD1306, which provides I2C communication. SSD1306 is a driver module for dot-matrix display systems. It is used for common cathode type displays and is suitable for many portable applications such as mobile phones, MP3 p...

0.96 INCH OLED Display Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels, so, it is thinner, and more elegant in compare to LCDs. The driver chip is SSD1306, which provides the I2C communication. SSD1306 is a driver module for dot-matrix display systems. It is used for common cathode type displays and is suitable for many portable applications such as mobile phone...