Search results for: 'motors to'

Vibration Motor Module Features This small built-in module uses a high-quality vibration motor. You can make some interesting Arduino projects such as an alarm, a notifier or even a vibrating robot! When the input is high, the motor will vibrate just like your cell phone. You can control the ON/OFF or vibration intensity through digital signal or PWM signal. The module adopts a high-quality mobile phone vibration motor; the vibration effect is evident, it is amplified...

TB6612FNG Dual Motor Driver Features Today, controlling the speed and direction of DC motors is very important due to their many applications. The most common method of controlling DC motors is the H-Bridge. This method allows you to control both the speed and the direction of the engine. The TB6612FNG dual module uses the same method to control two motors.One of the control pins of this module is PWM. This pin is connected to the gate of the transistor. The longer the duty cycle, the higher the voltag...

VNH2SP30 Monster Motor Shield Features Today, speed and direction control of DC motors is very common. These motors are widely used in manufacturing many tools and equipment. A full-bridge circuit is one of the simplest methods to control a DC motor. This method not only allows to control the motor direction, but can also be used for speed control. This shield contains a pair of VNH2SP30 full-bridge motor drivers. This driver has a higher current tolerance in compare to its similar drivers. This shield...

VNH2SP30 Moster Motor Driver Module Features Today, speed and direction control of DC motors is very common. A Full-Bridge circuit is one of the simplest methods to control a DC motor. This module is a Full-Bridge motor driver with high output current tolerance.INA, INB and PWM pins are used for controlling the speed and direction of motor rotation. The CS pin is also the current sensor. This pin's output voltage changes 0.13V per 1A.The input voltage should be between 5.5 and 16V. Also, the maximum al...

L298P Motor Driver Shield Features Today, DC motors are used in the manufacturing many tools and equipments. So, speed and direction control of these motors is very common. A half-bridge circuit is one of the simplest methods to control a DC motor. This method not only controls the motor direction, but also can be used for speed control. This shield is based on L298P IC. The most important features are: Control two DC motors simultaneously with voltage 4.8 to 24V and up to 2A current Schottky diodes ...

L9110 Dual Channel Driver Module Features Motor driver modules are very common nowadays and widely used to control the speed and direction of motors. The L9110S dual channel module is one of them. This module can control two DC motors and one stepper motor. It is based on L9110 IC. The key features are:The allowable continuous current for each channel:  800mA.The operating voltage: 2.5 - 12V.Two control pins for each DC motor.Suitable for toy cars motors.Can control one stepper motor. ...