Search results for: 'modul ic arduino'

TSD-10 Thermometrics Turbidity Sensor Features The TSD-10 turbidity sensor measures the turbidity using optics and light passing through the liquid. This sensor has an analog output and requires an ADC converter. It is used in washing machines to measure the density of water turbidity. By using an optical transistor and optical diodes, it measures the amount of light coming from the source of the light to the light receiver, in order to calculate water turbidity. This sensor has a waterproof body. Note You ...

WSN-03 Wireless Module Features This module features:Transmitting and receiving data over long distances (3.5 to 4 km)Operating frequency: 433, 470, 868 and 915 MHzData transfer sensitivity: 120dBmW (decibel-milliwatts)Receiving current: less than 30 mATransmitting current: less than 30 mAsleep mode current: less than 5 mA You can download the datasheet of this module here.[wpdm_package id='19515'] WSN-03 Wireless Module Pinout This Module has 8 pins:3V: Module ...

TLP281 4-Channel Opto-isolator IC Module Features Sometimes we need to separate the low-voltage section (microcontroller) from the high-voltage one in circuit in order to prevent noise and damage to the microcontroller. This module isolates the low-voltage section from the high-voltage section using TLP281-4 IC. This IC contains 4 LEDs (Light Emitting Diode). 4 high-voltage channels can be controlled by microcontroller using this IC.This module can also be used to turn on and off the servo motor and oth...

PS2 Joystick Module Features This module consist of two joysticks and two independent buttons. The joystick is very useful in robotics. Each joystick has two potentiometers on two X and Y axes and one push button. This module has two analog outputs and one digital output. In robotics, it can be used to control moving parts and motors. How it works This module contain two potentiometers in both X and Y axis. As shown below, the joystick is normally in the ...

5 Direction Joystick Button Module Features The 5 direction joystick button module is actually a combination of 5 pushbuttons that can be used in simple games. It is capable of connecting to a variety of microcontrollers. this module has 5 keys: Up, Down, Left, Right, Middle; And two additional keys: Set and Reset. This module works based on a common pin, COM. This means that by pressing each key, the related pin will connect to COM pin. 5 Direction Joystick Button Module Pinout This Module has 8...

Interfacing AS608 Optical Fingerprint Sensor Module with Arduino provides a comprehensive guide on integrating the AS608 optical fingerprint sensor with Arduino for secure fingerprint scanning and identification. This step-by-step guide will walk you through the process of enrolling and verifying fingerprints using the AS608 module. Discover how to connect the module to Arduino, install the required library, and follow the enrollment and verification procedures. Get started on your fingerprint sensor projec...

BMP280 Pressure Sensor Features The BMP280 barometric pressure module is a tiny sensor to measure barometric pressure. Its small dimensions and its low power consumption allow for the implementation in battery powered devices such as mobile phones, GPS modules or watches.The key features are:Pressure range: 300 to 1100 hPaCapable of measuring temperaturePressure measurement accuracy: 0.12 hPaSupport I2C communication up to 3.4 MHzSupport SPI communication up to 10 MHzApplications:Indoor navigationWeath...

HW-M10 Microwave Sensor Module Features The HW-M10 microwave sensor module is very accurate and widely used for motion detection in alarm and security systems. This module, like the PIR module, can detect any movement. The only difference is that instead of using radiation emitted by or reflected from objects, it uses microwave Doppler radar technology. This module has a digital output that is normally Low and becomes High (3.3V) if it detects motion and remains High for 2 to 3 seconds. ...

DY-SV8F MP3 Voice Playback Module Features The DY-SV8F MP3 Voice Playback Module is a nifty gadget designed for playing audio in a hassle-free way. It's got a cool feature – it can handle all sorts of audio formats, giving you options for different types of audio files. Plus, it comes with a built-in amplifier, making the sound nice and clear. Setting it up is a breeze, thanks to its user-friendly interface, making it perfect for DIY projects or any situation where you want smooth audio playback. This...