Search results for: 'interfacing'

IR Flame Sensor Features The flame sensor is actually an infrared receiver. In this module, the output of the infrared receiver is measured using a comparator IC. If the fire and flame (or any other infrared source) is close to the sensor, the output of the comparator is LOW, otherwise the output is HIGH. Note There is a potentiometer on board to change the sensor's sensitivity. In practice, this potentiometer changes the reference voltage of the comparator IC (the same voltage that the sensor voltage is co...

LM75 Temperature Sensor Features LM75 is a temperature sensor that can measure temperature range from -25 to +125 degrees Celsius. This sensor support I2C communication protocol and you can communicate with this module using two SDA and SCL pins to read the ambient temperature. You can download the datasheet of this module here. [wpdm_package id='17386'] LM75 Temperature Sensor Pinout This sensor has 5 pins:  VCC: Module power supply – 3.3-5 V  GND: Ground  SDA: Data pin...

MMA7361 Accelerometer Module Features The MMA7361 is a 3-axis accelerometer with ± 1.5g to ± 6g measuring range. You do not need a library and complex code to use MMA7361 accelerometer. In this module, there is an analog output voltage for each axis acceleration. As a result, you can read and analyze sensor's outputs using an analog-to-digital converter. You can download the datasheet of this module here. [wpdm_package id='17442'] The output voltage for each axis of this module is as follows...

TCS34725 Color Sensor Features The RGB TCS3472 Color Sensor Module is one of the best modules with which you can see different and stunning colors. This module is the best color sensor on the market that has RGB and Clear light sensing elements. This module has an IR filter that filters the IR spectrum, resulting in a larger color spectrum that can be viewed with high accuracy. The range of this module is 3800000:1. Therefore it is suitable for use behind dark glass. TCS34725 Color Sensor Pinout...

MAX4466 Module Features The MAX4466 sensor is used to detect ambient sounds. This module has a built-in amplifier. Note The module output is not zero in silent mode and has 1.25V offset. MAX4466 Electret Microphone Pinout This sensor has 3 pins:VCC: Module power supply – 3-5.5 VGND: GroundOUT: Digital output data to the microcontrollerYou can see pinout of this module in the image below. You can download the datasheet of thi...

MPXV7002 Airspeed Module Features The MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional ...

Tilt Switch Sensor Features The function of this sensor is similar to a switch. There are 2 rolling ball inside the cylindrical housing of the sensor. Depending on how the two ball are positioned, the switch is connected and disconnected. Tilt Switch Sensor Pinout This sensor has 3 pins:VCC: Module power supply –3.3-5 VGND: GroundOUT: Digital outputYou can see pinout of this module in the image below. Required Materials ...

DWM1000 Transceiver Module Features DWM1000 is an IEEE802.15.4-2011 UWB-compliant wireless transceiver module based on DecaWave’s DW1000 IC. DWM1000 measures location of objects using Real-Time Location Systems (RTLS) to a precision of 10cm indoors. This modules features a high data communication rate, up to 6.8 Mb/s, and has excellent communications range of up to 300m. It is also used in Wireless Sensor Networks (WSN). Tip You need at least 2 pieces of this sensor to use it. It is better ...

R301T Fingerprint Module Features This is an integrated fingerprint module with image collecting and algorithm chip together. It works in different conditions of the fingers, whether the fingers dry, wet, light texture, or old. It works in a variety of applications such as access control, safety deposit boxes. This fingerprint module communicates with the controllers with UART, Connect to any microcontroller or system with TTL serial, and sends packets of data to take photos, detect prints, hash, and se...

YwRobot Vibration Sensor Features Tilt sensors detect vibrations by having small metal spheres inside. You can use the generated signal to make an alarm if there is vibration. The output of this sensor is a digital signal. This Vibration Sensor is easy to interface with Arduino and you can use it to detect vibration. YwRobot Vibration Sensor Pinout This sensor has 4 pins:5V: Module power supply –2.4 V to 5 VGND: GroundOUT: OutputYou can see pinout of this module in...