Search results for: 'col'

2.2 INCH Full Color TFT Display Features The TFT display is a kind of liquid crystal display that is connected to each pixel using a transistor and it features low current consumption and backlight. This 2.2-inch full color LCD has a narrow PCB screen. The resolution is 320x280 pixels and it has a four-wire SPI interface and white backlight.This display also has a touch screen and SD card slot. Note The module voltage is 3.3 V and a voltage divider is required to interface it with Arduino. ...

1.8 Inch SPI TFT Color Display Features TFT display is a kind of liquid crystal LCD that is connected to each pixel using a transistor and it features low current consumption, high-quality, high-resolution and backlight. This 1.8 inch full color LCD has a narrow PCB screen. The resolution is 128x160 pixels and it has a four-wire SPI interface and white backlight. The driver is ST7735.This display also has a SD card slot. Note The operating voltage of this module is 3.3V and voltage divider is r...

1.3 INCH OLED IPS Display Module Features OLED displays offer many advantages in compare to LCDs and LEDs. These full color modules are high-quality. This 1.3 inch OLED display has SPI communication protocol. The resolution is 240x240, which means it contains 57,600 pixels. So, it enjoys a clear and transparent display quality. 1.3 INCH OLED IPS Display Module Pinout This module has 7 pins:GND: GroundVCC: Module power supply – 3.3 VSCL: SPI clockSDA: SPI dataRE...

0.96 INCH OLED IPS Display Module Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels. So, it is thinner, low-power and more elegant in compare to LCDs. The driver chip is ST7735, which provides I2C communication. You can download the datasheet of this module here.  [wpdm_package id='20572'] 0.96 INCH SPI OLED IPS Display ...

GY-31 TCS3200 Color Sensor Features The TCS3200 color sensor uses 64 photodiodes to detect color. The output of this sensor is a square wave. Color intensity is obtained directly from the frequency of the square wave. These 64 photodiodes consist of 16 diodes with red filter, 16 diodes with green filter, 16 diodes with blue filter and 16 transparent photodiodes without filter. All 16 diodes of each type are connected in parallel. To detect any color, the photodiodes corresponding to that color are activ...

3.5 INCH Full Color Touch TFT Display Features The TFT display is a kind of liquid crystal display that is connected to each pixel using a transistor, and it features low current consumption, high-resolution and backlight. The resolution is 480x320 pixels, and it has a twelve-wire SPI Parallel interface and white backlight. The driver of this display is ILI9486. Download the datasheet of this module here.  [wpdm_package id='22183'] 3.5 INCH TFT LCD Display Pin...

Overview Sometimes in electronic projects, you need to use two or more microcontrollers in your circuit at the same time. Normally, these microcontrollers are connected to each other and keep transmitting data with one another. The transmitting of data between two or more microcontrollers can be done with several communication protocols such as SPI, UART, CAN, USB, etc. Another one which we will be covering here in this tutorial is I2C (Inter-Integrated Circuit) protocol. Using this protocol, one of the mi...

Introduction RFID, which stands for radio frequency identification, enables data reading and identification of unique tags using radio waves. RFID modules operate on specific frequencies, requiring tags that match the reader module's frequency. In this article, we will design and implement a simple identification system using a 125KHz RFID module and the Wiegand protocol. Tip While the RFID module used in this article shares similarities in shape and structure with the RDM6300 RFID reader m...