Search results for: 'are'

LM393 Sensor Features The LM393 module is an IR counter that has an IR transmitter and receiver. If any obstacle is placed between these sensors, a signal is sent to the microcontroller. The module can be used in association with a microcontroller for motor speed detection, pulse count, position limit, etc. You can download the datasheet of this module here. [wpdm_package id='17841'] LM393 Sensor Pinout This sensor has 3 pins: VCC: Module power supply – 3-5.5 V GND: Ground OUT: Digital...

4 Channel Infrared Module Features This module has 4 IR transmitter and receiver pairs that can be used to detect black and white color as well as obstacles. Each channel has digital voltage output. You can adjust the sensor’s sensitivity using the on board potentiometers. Pinout You can see pinout of IR module in the image below. Required Materials Hardware Components Arduino UNO R3 × 1 4 Channel IR Obstacle Avoidance Proximity Module × 1 Male to Male jumper wir...

TCRT5000 IR SENSOR Features The TCRT5000 sensor consist of an IR transmitter and IR receiver. When the proper voltage is applied to the infrared transmitter, it transmits and emits infrared waves. When these waves collide with an object, the infrared receiver, which is a phototransistor, receives the waves. A phototransistor works like a normal transistor, except that its base is excited by light. Note This sensor works best for objects in the range of 0.2 to 1.5 cm. You can download the datashe...

YF-S201C Water Flow Sensor Features YF-S201C is a sensor used to measure the water flow. This water flow sensor mainly consists of a plastic valve body, rotor assembly, and hall effect sensor. This module works based on the hall magnetic effect. So when water flows through the rotor assembly, the rotor will rotate and the hall effect sensor will produce an electric pulse. By counting these generated pulses, the amount of water passing through the sensor can be calculated.The measuring range of water fl...

YF-S201 Water Flow Sensor Features YF-S201 is a sensor used to measure the water flow. This water flow sensor mainly consists of a plastic valve body, rotor assembly, and a hall effect sensor. This module works based on the hall magnetic effect. So when the water flows through the rotor assembly, the rotor will rotate and the hall effect sensor will produce an electric pulse. By counting these generated pulses, the amount of water passing through the sensor can be calculated.The measuring range of wat...

E18-D80NK Infrared Obstacle Avoidance Sensor Features The E18-D80NK sensor is used to detect obstacles and objects. This sensor works based on transmitting infrared rays. First, the transmitter sends the rays in a direct path. This ray hits the obstacle and returns to the receiver. There is a potentiometer on this module that can be adjusted to change this detection distance from 3 to 80cm. In fact, with this sensor, the obstacle can be detected, but the distance cannot be calculated directly. There is also...

SI5351 Signal Square Wave Generator Features The SI5351 Signal Square Wave Generator Module is your go-to tool for crafting precise and customizable square wave signals effortlessly. This nifty module is designed to make generating signals a breeze, offering a simple and user-friendly solution for hobbyists and electronics enthusiasts. What sets the SI5351 apart is its ability to produce highly accurate square wave signals across a wide frequency range, making it perfect for a variety of applications, f...

APDS-9960 Infrared Gesture Sensor Module Features The APDS-9960 Infrared Gesture Sensor Module is an advanced device that enables intuitive interaction with electronic devices through hand gestures. This sensor module uses infrared technology to accurately detect hand movements, offering a hands-free control option for various applications. With its ability to recognize gestures such as swipes, taps, and scrolls, the APDS-9960 is perfect for touchless control interfaces, gaming consoles, and smart appli...