Search results for: '7 arduino'

MMA7361 Accelerometer Module Features The MMA7361 is a 3-axis accelerometer with ± 1.5g to ± 6g measuring range. You do not need a library and complex code to use MMA7361 accelerometer. In this module, there is an analog output voltage for each axis acceleration. As a result, you can read and analyze sensor's outputs using an analog-to-digital converter. You can download the datasheet of this module here. [wpdm_package id='17442'] The output voltage for each axis of this module is as follows...

TCS34725 Color Sensor Features The RGB TCS3472 Color Sensor Module is one of the best modules with which you can see different and stunning colors. This module is the best color sensor on the market that has RGB and Clear light sensing elements. This module has an IR filter that filters the IR spectrum, resulting in a larger color spectrum that can be viewed with high accuracy. The range of this module is 3800000:1. Therefore it is suitable for use behind dark glass. TCS34725 Color Sensor Pinout...

MPXV7002 Airspeed Module Features The MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional ...

TM7711 24-bit Pressure Module Features The TM7711 is a 24-bit 2-channel analog-to-digital converter used to measure resistance changes. This module is widely used in load cell and air pressure sensors. This module features high accuracy, quality and cost-effectiveness. Note This module does not support I2C communication. You can download the datasheet of this module here. [wpdm_package id='18020'] TM7711 24-bit Pressure Module Pinout This sensor has 8 pins: VIN: Module power supply – 3.3-5...

Load Cell Sensor Features Load cells are electronic sensors that are able to measure weight and force. The body is usually made of aluminum, alloy steel, or stainless steel which makes it very sturdy but also minimally elastic. This elasticity gives rise to the term "spring element", referring to the body of the load cell. When force is exerted on the load cell, the spring element is slightly deformed, and unless overloaded, always returns to its original shape. Load cell capacity is equal to the maximum am...

NEO-7M GPS Module Features GY-NEO-7M module is an advanced GPS module that supports UART communication protocol with active antenna. You can interface this module easily with any microcontroller. This module has a rechargeable battery and can also be connected directly to a computer using a USB to TTL converter.This module can receive data and then calculate the geographical position with a very high accuracy and speed. In addition to supporting BeiDou, Galileo, GLONASS, GPS / QZSS, the module has inter...

MQ-7 Smoke Gas Module Features MQ series sensor uses a small heater inside with an electrochemical sensor in order to measure a different kinds of gas combinations. They can be calibrated, but, in order to do that, a known concentration of measured gas or gases is needed. Gas sensor is an indoor module and is used at room temperature. The MQ-7 sensor has high sensitivity to Carbon Monoxide and is able to detect the concentration of carbon monoxide in the air. The measurable concentration range of this s...

PC817 Optocoupler Module Features An Optocoupler, is an electronic component that interconnects two separate electrical circuits by means of a light sensitive optical interface.There is a is a light emitting diode with a phototransistor inside the optocouplers, both of them are isolated from the external environment of the optocoupler; This means that the internal phototransistor can only receive light emitted by the internal light emitting diode. The phototransistor base is stimulated by light receive...

Overview Are you looking for a reliable temperature sensor? The MAX6675 Thermocouple Module is just what you need. With its exceptional features and seamless integration with Arduino, this module is perfect for measuring temperature accurately. In this article, we will explain the key features of the MAX6675 Thermocouple Module, provide step-by-step instructions for Arduino interfacing, and offer helpful tips for successful installation. MAX6675 Thermocouple Module Features This module is a temperature sens...

SI7021 Temperature and Humidity Sensor Features The SI7021 humidity and temperature sensor is a CMOS integrated sensor with I2C communication protocol. This sensor is factory calibrated and calibration data is stored in an on-chip non-volatile memory.This sensor is used in various applications such as thermostat and humidistats, respiratory therapy, Indoor weather stations, tablets, mobile phones, etc.Humidity measurement range: 0 to 100%RH - Accuracy 3%RHTemperature measuring range: -40°C to +125°C ...