Search results for: '20 ac'

ULN2003 Stepper Motor Driver Features We usually use stepper motors when we need precise control of the motor shaft. These motors can be used in robot arm, 3D printers, CNC machines, etc. 28BJY-48 is a kind of stepper motor. In full step mode, these motors have a 1 to 64 speed reduction gearbox and eachfull 360 degree rotation consists of 32 steps. The ULN2003 driver is commonly used to control these motors. ULN2003 IC consists of 7 pairs of Darlington transistors, each pair can withstand 500mA and 50V. Th...

Interfacing 3D Printer Ramps 20X04 LCD Smart Controller with Arduino Using this display, you don’t need a computer to control your 3D printer anymore. In this shield, an SD card is used to transfer the 3D designs to the 3D printer and store the G-Codes. This shield consist of a 20x04 Character Line LCD. Using the rotary encoder on the board, you can move in the device menu and access data. This display is compatible with ramps 1.4 controllers and can be run with marlin and repiter firmwares. ...

Character LCD Display Features Character display module is an LCD module with a certain number of rows and columns, and has a green or blue backlight and white character. These displays can usually be used to display text, characters and numbers. The contrast can be adjusted by connecting a potentiometer to pin 3. Pin 15 and 16 are for backlight. You can use 6 pins E, RS, DB4, DB5, DB6, DB7 to interface the display with Arduino. You can download the datasheet of 2004 C...

GY-31 TCS3200 Color Sensor Features The TCS3200 color sensor uses 64 photodiodes to detect color. The output of this sensor is a square wave. Color intensity is obtained directly from the frequency of the square wave. These 64 photodiodes consist of 16 diodes with red filter, 16 diodes with green filter, 16 diodes with blue filter and 16 transparent photodiodes without filter. All 16 diodes of each type are connected in parallel. To detect any color, the photodiodes corresponding to that color are activ...

Single Axis 1:120 Gear Motor Features If you work in electronics and robotics field, you have come across DC motors at least once. These motors are one of the most widely used elements in electronics and robotics. These motors convert direct current electrical energy into mechanical energy.An external source provides power for the stator of these motors. As a result, the current flowing through the stator creates a uniform field under the poles. Of course, permanent magnet can supply the stator field, ...

SHT20 Temperature and Humidity Sensor Features The SHT20 temperature and humidity module is high-precious, full calibrated, with very low power consumption and high response speed. This sensor is a combination of a capacitive humidity sensor and a silicon band gap temperature sensor. The key features are:Temperature measurement range: -40 to +125 °CTemperature measurement accuracy: 0.3 °CHumidity measurement range: 0 to 100%Humidity measurement accuracy: 3% RHCommunication Protocol: I2C ...

APC220 Wireless Data Communication Module Features Electronic devices need to be connected wirelessly in so many cases. In these cases, Radio Frequency or RF equipments are used. RF modules include all radio waves that can travel different distances and reach the receiver according to their frequency and amplitude.The APC220 module uses UART / TTL for communication. This module comes with a USB to TTL converter that you can use to connect the module directly to your system and connect the second modul...

Introduction Would you like to unlock the full potential of a sensor? Do you enjoy challenging your limits? Well, that’s exactly what the HR202L sensor offers! HR202L is a variable capacitor with a non-linear logarithmic behavior, whose values depend highly on the ambient temperature. Whether you're new to Arduino or have been using it for a while, this guide will provide you with everything you need to get started with the HR202L sensor. By following clear instructio...