Search results for: 'arduinos e'

Discover how to effectively interface the IRF520 MOSFET Driver Module (HCMODU0083) with Arduino in this step-by-step tutorial. Learn about the key features of this module and explore its applications in controlling DC motors using Pulse Width Modulation (PWM) technique. With the ability to convert a constant input voltage to a variable voltage, this module allows precise control over the speed of your DC motor. Whether you're a beginner or an experienced Arduino enthusiast, this guide will help you master t...

TB6612FNG Dual Motor Driver Features Today, controlling the speed and direction of DC motors is very important due to their many applications. The most common method of controlling DC motors is the H-Bridge. This method allows you to control both the speed and the direction of the engine. The TB6612FNG dual module uses the same method to control two motors.One of the control pins of this module is PWM. This pin is connected to the gate of the transistor. The longer the duty cycle, the higher the voltag...

E18-D80NK Infrared Obstacle Avoidance Sensor Features The E18-D80NK sensor is used to detect obstacles and objects. This sensor works based on transmitting infrared rays. First, the transmitter sends the rays in a direct path. This ray hits the obstacle and returns to the receiver. There is a potentiometer on this module that can be adjusted to change this detection distance from 3 to 80cm. In fact, with this sensor, the obstacle can be detected, but the distance cannot be calculated directly. There is also...

VNH2SP30 Monster Motor Shield Features Today, speed and direction control of DC motors is very common. These motors are widely used in manufacturing many tools and equipment. A full-bridge circuit is one of the simplest methods to control a DC motor. This method not only allows to control the motor direction, but can also be used for speed control. This shield contains a pair of VNH2SP30 full-bridge motor drivers. This driver has a higher current tolerance in compare to its similar drivers. This shield...

Touch Switch Module Features A touch sensor is a type of switch that needs to be touched by an object to operate. Touch sensors work completely similar to a switch. Note When this switch is touched, the output voltage will be HIGH, otherwise is LOW. Note The output current is very low (about 40 mA). If you want to connect a higher current device to this switch, you must add a relay or transistor to your circuit. Note There is a jumper on the board. If you change the status ...

CJMCU-0201 Double Touch Sensor Features A touch sensor is a type of switch that only has to be touched by an object to operate. Touch sensors work completely similar to a switch. This sensor has two separate pads and can be used as two separate switches. Note When this switch is subjected to touch, the output voltage will be HIGH, otherwise it is LOW. Note The output current is very low (about 40 mA). If you want to connect a higher current device to this switch, you must add a rela...

Heart Rate Pulse Sensor Features Heart Rate Pulse Sensor can be used to measure the heart rate and some related parameters such as cardiac arrhythmia (i.e., abnormal heart rhythm). If you touch this sensor with any area of your skin that is closest to the arteries (such as the finger or earlobe), the sensor detects blood in the arteries. Each time the heart beats, blood is pumped through the arteries, and the sensor detects the flow of blood and increases the output voltage. Note This sensor has an analog o...

WSN-03 Wireless Module Features This module features:Transmitting and receiving data over long distances (3.5 to 4 km)Operating frequency: 433, 470, 868 and 915 MHzData transfer sensitivity: 120dBmW (decibel-milliwatts)Receiving current: less than 30 mATransmitting current: less than 30 mAsleep mode current: less than 5 mA You can download the datasheet of this module here.[wpdm_package id='19515'] WSN-03 Wireless Module Pinout This Module has 8 pins:3V: Module ...

VNH2SP30 Moster Motor Driver Module Features Today, speed and direction control of DC motors is very common. A Full-Bridge circuit is one of the simplest methods to control a DC motor. This module is a Full-Bridge motor driver with high output current tolerance.INA, INB and PWM pins are used for controlling the speed and direction of motor rotation. The CS pin is also the current sensor. This pin's output voltage changes 0.13V per 1A.The input voltage should be between 5.5 and 16V. Also, the maximum al...

Inductive Proximity Sensor LJ12A3-4-Z/BY Features A proximity sensor is a sensor able to detect the presence of nearby objects. The inductive proximity sensor LJ12A3-4-Z / BY has three pins, two of which are connected to a supply voltage of 6 to 36V. The output pin is PNP and NO (Normally Open). That is, it is normally Low and when it detects an object, it is HIGH. The detection distance is 4 mm and it can only detect metal objects such as copper, aluminum, iron, etc. Note Because the operatio...