Search results for: 'arduinos e'

HTTM Series Capacitive Touch Sensor Features This touch module is available in different series with a variety of backlight colors. It features low price, high efficiency and long lifespan. The sensor part can also be placed on glass and thin plastic.Its output is on trigger mode which works like a switch. That is, when it is touched, its will be HIGH and remains HIGH until the next touch.The input voltage is 2.7 to 6 V and output pin voltage is 3.3 V. You can download t...

TTP223 Capacitive Touch Sensor Features The TTP223 sensor can be used in a wide range of applications such as smartphones and tablets. It can also detect from behind glass and thin surfaces. When a finger touches the sensor, the module output gets HIGH, and immediately switches to LOW if not touched. The operating voltage is 2 to 5.5 V. Its maximum response time is 220 milliseconds. You can download the datsheet of this module here. [wpdm_package id='19196'] TTP223 Capacitive Touch Sensor...

MicroDuino Touch Sensor Features This touch button is a simple digital output sensor. It uses the TTP223 chip to detect capacitance change. This sensor features small size, high sensitivity, long power consumption and long lifespan. When the sensor is touched, its output is LOW, otherwise it is HIGH. You can download the datsheet of this module here. [wpdm_package id='19221'] MicroDuino Touch Sensor Pinout This Module has 4 pins: VCC: Module power supply – 3.3 to 5 V GND: Ground OUT: ...

OE-TP Light Touch Switch Module Features This module has a fingerprint sensor that can control the digital output voltage. So The output voltage will change with each touch. The operating voltage is 5 to 20 V (recommended 12 volts) and operating current is up to 3 A (peak 10 A). It also has two red and blue LEDs. The blue LED indicates the module is powered on and the red LED indicates touch detection.This type of sensor is widely used in home lighting, motor speed control, toys, etc. ...

2.8 INCH TFT DISPLAY Shield Features This module is a 2.8-inch TFT LCD module with "320X240" resolution and suitable for Arduino Uno and Mega2560 development boards. It's a touch display shield and uses 8-bit parallel port communication. You can download the datasheet of this module here. [wpdm_package id='19253'] 2.8 INCH TFT Display Shield Pinout This module has 20 pins:5V: Module power supply – 5 V3.3V: Module power supply – 3.3 VGND: GroundLCD_RST: LCD...

SR602 PIR Motion Detection Sensor Features PIR or Passive Infra-Red sensors detect motion based on infrared light of ambient heat. PIR sensors are commonly used in security alarms to detect the presence of human. The SR602 sensor is able to detect movement up to a distance of about 3 meters. This sensor has a digital output. When it detects motion, output will be High and it last 2.5 second. After that it returns to LOW. Note You can adjust sensitivity and HIGH time duration usin...

ADXL345 Accelerometer Module Features ADXL345 accelerometer sensor can measure angle orientation and object path. The sensor can do that in three X, Y and Z axes. It can also measure dynamic and static acceleration forces. Dynamic acceleration force is due to motion and vibration and static acceleration is caused by gravity. The sensitivity range of the ADXL345 accelerometer sensor is from +-2g to +-16g. (g is approximately 9.8) For example, when this sensor is placed on a flat surface, its value is +1...

VL53L0X Distance Sensor Features The VL53L0X sensor is a laser rangefinder. First, the sensor sends a laser pulse, and the distance from object to the sensor is estimated by measuring the travel time of the laser pulse. Due to the very high speed of light, this sensor is not used in applications less than a millimeter. This module can measure a maximum distance of 2 meters. The operating voltage is 2.8 to 5 volts and it uses the I2C protocol to communicate with the microcontroller. You can down...

Overview Are you looking for a reliable temperature sensor? The MAX6675 Thermocouple Module is just what you need. With its exceptional features and seamless integration with Arduino, this module is perfect for measuring temperature accurately. In this article, we will explain the key features of the MAX6675 Thermocouple Module, provide step-by-step instructions for Arduino interfacing, and offer helpful tips for successful installation. MAX6675 Thermocouple Module Features This module is a temperature sens...

I2C 16x2 Character LCD Features The 16x2 character LCD has two rows with the ability to display 16 ASCII characters on each row. Normal 16x2 character LCDs use 7 digital pins, while this module with I2C interface has reduced this number to 2 pins. A potentiometer is also included to adjust the display contrast. These LCDs have many applications and are used in cases such as: copiers and fax machines, laser printers, industrial testing tools, etc. You can download the d...