Search results for: 'with a'

VNH2SP30 Moster Motor Driver Module Features Today, speed and direction control of DC motors is very common. A Full-Bridge circuit is one of the simplest methods to control a DC motor. This module is a Full-Bridge motor driver with high output current tolerance.INA, INB and PWM pins are used for controlling the speed and direction of motor rotation. The CS pin is also the current sensor. This pin's output voltage changes 0.13V per 1A.The input voltage should be between 5.5 and 16V. Also, the maximum al...

Inductive Proximity Sensor LJ12A3-4-Z/BY Features A proximity sensor is a sensor able to detect the presence of nearby objects. The inductive proximity sensor LJ12A3-4-Z / BY has three pins, two of which are connected to a supply voltage of 6 to 36V. The output pin is PNP and NO (Normally Open). That is, it is normally Low and when it detects an object, it is HIGH. The detection distance is 4 mm and it can only detect metal objects such as copper, aluminum, iron, etc. Note Because the operatio...

APDS-9930 Ambient Light Sensor Features This module consists of ambient light , IR and proximity sensors. The detection distance is up to 100 mm. The APDS-9930 sensor measures the ambient light. This sensor can also detect 0.01 Lux brightness in the dark. It can also be used behind dark glass like a mobile screen. For example, it turns off the touch screen during voice calls when your ear is close to the screen.This sensor can be used to adjust the brightness of mobile backlight and the approp...

SW-520D Vibration Tilt Sensor Features The SW-520 sensor consists of two metal balls which switches as a trigger. When the switch is positioned horizontally, and when the sensor angle is less than 10°, the circuit is open (off state) and more than 10°, it is closed (on stated). But when the switch is positioned vertically, the circuit is open when the sensor angle is less than 45°, and close when the angle is more than 45°. To see exactly how this sensor works, read the datasheet. The SW-520D sensor is ...

TMP36 Temperature Sensor Features The TMP36 sensor is used to measure temperature from -40°C to +125°C and its tolerance threshold is +150°C. This sensor is calibrated directly on Celsius and its accuracy is 2°C. This sensor has an analog output. The output voltage changes linearly as the temperature changew. For example, the sensor output voltage is 0.75 volts at 25°C and 2.7 volts at 125°C.This sensor can be used in environmental control systems, thermal protection, fire alarms, CPU thermal m...

TLP281 4-Channel Opto-isolator IC Module Features Sometimes we need to separate the low-voltage section (microcontroller) from the high-voltage one in circuit in order to prevent noise and damage to the microcontroller. This module isolates the low-voltage section from the high-voltage section using TLP281-4 IC. This IC contains 4 LEDs (Light Emitting Diode). 4 high-voltage channels can be controlled by microcontroller using this IC.This module can also be used to turn on and off the servo motor and oth...

LJ12A3-4-Z/BX Inductive Proximity Sensor Features Proximity sensors are used to detect the presence of nearby objects. The LJ12A3-4-Z / BX sensor has three pins, two of which are connected to a supply voltage of 6 to 36 V. The output pin is PNP and NO (Normal Open). That is, it is normally Low and when it detects an object, it becomes HIGH. The detection distance is 4 mm, and it can only detect metal objects such as copper, aluminum, iron, etc. Note Since the operation voltage is more than 5 V,...

L298P Motor Driver Shield Features Today, DC motors are used in the manufacturing many tools and equipments. So, speed and direction control of these motors is very common. A half-bridge circuit is one of the simplest methods to control a DC motor. This method not only controls the motor direction, but also can be used for speed control. This shield is based on L298P IC. The most important features are: Control two DC motors simultaneously with voltage 4.8 to 24V and up to 2A current Schottky diodes ...

Learn how to interface a 4x3 membrane matrix keypad with Arduino using this comprehensive tutorial. By following the steps outlined below, you can easily connect the keypad to your Arduino and start using its 12 buttons with only 7 pins on the microcontroller. Features of the 4x3 Matrix Keypad Keypads are one of the most popular components that are widely used in electronics. Everybody can communicate with the system by switches. Normally, every key occupies one digital pin of the microcontroller. But by us...

4-bit Button Touch Proximity Sensor Features This module has 4 fingerprint touch inputs and 4 digital output pins. It also has 5 LEDs. One for power supply and 4 LEDs indicate fingerprint sensors. If you touch each sensor, the output becomes HIGH and the LED turns on. If you don’t touch, the output will be LOW and the LED turns off.This module can be used on glass, ceramic, plastic and other surfaces. 4-bit Button Touch Proximity Sensor Pinout This module has 6 pi...