Search results for: 'sen'

BMP280 Pressure Sensor Features The BMP280 barometric pressure module is a tiny sensor to measure barometric pressure. Its small dimensions and its low power consumption allow for the implementation in battery powered devices such as mobile phones, GPS modules or watches.The key features are:Pressure range: 300 to 1100 hPaCapable of measuring temperaturePressure measurement accuracy: 0.12 hPaSupport I2C communication up to 3.4 MHzSupport SPI communication up to 10 MHzApplications:Indoor navigationWeath...

XKC-Y26-V Non-contact Liquid Level Sensor Features The XKC-Y26-V Non-Contact Liquid Level Sensor is a digital output sensor that detects the presence of liquid. There is an LED on the module, which will turn on if liquid is detected, otherwise it turns off. There is also a screw on the body of the module that you can use to adjust the sensitivity of the sensor. This sensor is suitable for dangerous applications such as detection of toxic substances, strong acids, strong alkalis, etc. ...

Overview In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code. What You Will Learn How soil moisture sensors work How to use soil moisture sensor with Arduino Soil Moisture Sensor - How Does It Work? The soil moisture sensor consists of two probes that measure the volume of water in the soil. The two probes allow the electric current to pass through the soil and, according to its resistance,...

DHT22 Temperature Humidity Sensor Features The DHT22 Temperature Humidity Sensor is a great choice for measuring ambient temperature and humidity. This sensor consists of a capacitive humidity sensor and a heat resistor. The DHT22 sensor has a wide range of temperature and humidity measurement. It can measure temperature in range of -40 to +125 degrees Celsius with 0.5 degrees Celsius accuracy. Humidity is measured in range of 0 to 100% with 2.5% accuracy. This sensor transmits data through a single di...

SHT10 Temperature Humidity Sensor Features The SHT10 module is a high accuracy sensor for measuring temperature and humidity. This module can be easily connected to a variety of microcontrollers using two digital output pins. One for data transfer and the other for adjusting data transfer speed between the module and the microcontroller. The range of temperature measurement is -40 to +123.8 degrees Celsius with 0.01 degrees Celsius accuracy. The humidity range is 0 to 100% with 0.05% accuracy. This module i...

SHT31 Temperature Humidity Sensor Features The SHT31 sensor module is a temperature and humidity sensor with high accuracy and quick response time. Specifications: Temperature measurement range: -40 to +90 degrees Celsius Temperature measurement accuracy: 3 degrees Celsius Humidity measurement range: 0 - 100% RH Humidity measurement accuracy: 2% RH Communication protocol: I2C Data transition: up to 1MHz frequency Address pin included: To adjust I2C protocol address ...

DHT21/AM2301 Temperature and Humidity Sensor Features The AM2301 / DHT21 temperature and humidity sensor consists of two sensors: A capacitive humidity sensor and a thermistor. This sensor transmits data using a single digital pin, so it can communicate with the microcontroller using only one digital pin. The sampling frequency is 0.5Hz, which means that you can get new data every two seconds. DHT21/AM2301 Temperature and Humidity Sensor Pinout This Module has 3 w...

TTP224 Capacitive Touch Sensor Module Features This 4 Channel Capacitive Touch Sensor Module uses the TTP224 IC and is actually a combination of 4 capacitive touch sensors. This module has 4 outputs, by touching each button from 1 to 4, the corresponding output will be High. There are also 4 LEDs on the module that will turn on by touching each button. TTP224 Capacitive Touch Sensor Module Pinout This module has 12 pins and 4 touch buttons:6 pins on the Right:OUT1: ...