Search results for: 'arduino e'

Liquid Level Float Switch Features The liquid level float switch is a very simple sensor that works like a switch. This sensor places vertically, floating on water. The float is located on a pipe that can move on the liquid surface. It works based on the magnetic field. Note Until you have not placed the sensor on the liquid surface, the switch is closed and when the sensor is placed on the liquid, the float moves on the pipe and goes up and the switch remains open. ...

Grove Touch Sensor Features This sensor uses TTP223-B IC. When your finger approaches this sensor, the capacitance of the metal surface will change. So you don’t need to touch sensor completely. Besides, you can put this sensor under a non-metallic surface and touch it. This sensor is waterproof, and it has a variety of applications.  Note There are two red and black wire that have been connected to this sensor. If you want to increase the fingerprint sensitivity, you can remove the black w...

0.91 INCH OLED DISPLAY Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels, so, it is thinner, and more elegant in compare to LCDs. The driver chip is SSD1306, which provides I2C communication. SSD1306 is a driver module for dot-matrix display systems. It is used for common cathode type displays and is suitable for many portable applications such as mobile phones, MP3 p...

0.96 INCH OLED Display Features OLED displays are high contrast and high-resolution displays, so they provide a good readability for users. There is no backlight on OLED, and it uses independent-illuminated pixels, so, it is thinner, and more elegant in compare to LCDs. The driver chip is SSD1306, which provides the I2C communication. SSD1306 is a driver module for dot-matrix display systems. It is used for common cathode type displays and is suitable for many portable applications such as mobile phone...

2.4 INCH TFT DISPLAY Features This module is a 2.4-inch TFT LCD module with "320X240" resolution and 65K color display. It is suitable for Arduino Uno and Mega2560 development boards, and also supports SD card expansion function. It uses 8-bit parallel port communication, and the driver IC is ILI9341. You can download the datasheet of this module here. [wpdm_package id='19103'] 2.4 INCH TFT Display Pinout This module has 20 pins:5V: Module power supply – ...

3.5 INCH TFT DISPLAY Features This module is a 3.5-inch TFT LCD module with "320X480" resolution and 65K color display. It is suitable for Arduino Uno and Mega2560 development boards, and also supports SD card expansion function. It uses 8-bit parallel port communication, and the driver IC is ILI9486. You can download the datasheet of this module here. [wpdm_package id='19117'] 3.5 INCH TFT Display Pinout This module has 20 pins: 5V: Module power supply – 5 V 3.3V: Module power supply �...

SW-520D Tilt Sensor Module Featurs A SW-520D Tilt Sensor is an electronic device that detects the orientation of an object and gives its output High or Low accordingly. Basically, it has a metallic ball inside it which moves and makes the circuit. The sensor's sensitivity is at 10 degrees tilt. This module has two output pins for each path. When tilt angle is more than 10 degree, the output is low. Note The output is on trigger mode. You can download the datasheet of this module ...

Double-sided Touch Sensor Features There is a wide variety of touch sensors. One of these sensors is double-sided touch sensor with 3-pin and 4-pin interface on each side. Pin N in 4-pin interface is not used. Note Pin S is always HIGH and changes to LOW if the switch is touched. (If not touched, it will be HIGH again.) Double-sided Touch Sensor Pinout This Module has 3 main pins:VCC: Module power supply – 3.3/ 5 VGND: GroundS: Sensor output (5V)N: Not us...

HTTM Series Capacitive Touch Sensor Features This touch module is available in different series with a variety of backlight colors. It features low price, high efficiency and long lifespan. The sensor part can also be placed on glass and thin plastic.Its output is on trigger mode which works like a switch. That is, when it is touched, its will be HIGH and remains HIGH until the next touch.The input voltage is 2.7 to 6 V and output pin voltage is 3.3 V. You can download t...

TTP223 Capacitive Touch Sensor Features The TTP223 sensor can be used in a wide range of applications such as smartphones and tablets. It can also detect from behind glass and thin surfaces. When a finger touches the sensor, the module output gets HIGH, and immediately switches to LOW if not touched. The operating voltage is 2 to 5.5 V. Its maximum response time is 220 milliseconds. You can download the datsheet of this module here. [wpdm_package id='19196'] TTP223 Capacitive Touch Sensor...