Search results for: 'sens'

Grove Touch Sensor Features This sensor uses TTP223-B IC. When your finger approaches this sensor, the capacitance of the metal surface will change. So you don’t need to touch sensor completely. Besides, you can put this sensor under a non-metallic surface and touch it. This sensor is waterproof, and it has a variety of applications.  Note There are two red and black wire that have been connected to this sensor. If you want to increase the fingerprint sensitivity, you can remove the black w...

SW-520D Tilt Sensor Module Featurs A SW-520D Tilt Sensor is an electronic device that detects the orientation of an object and gives its output High or Low accordingly. Basically, it has a metallic ball inside it which moves and makes the circuit. The sensor's sensitivity is at 10 degrees tilt. This module has two output pins for each path. When tilt angle is more than 10 degree, the output is low. Note The output is on trigger mode. You can download the datasheet of this module ...

HTTM Series Capacitive Touch Sensor Features This touch module is available in different series with a variety of backlight colors. It features low price, high efficiency and long lifespan. The sensor part can also be placed on glass and thin plastic.Its output is on trigger mode which works like a switch. That is, when it is touched, its will be HIGH and remains HIGH until the next touch.The input voltage is 2.7 to 6 V and output pin voltage is 3.3 V. You can download t...

TTP223 Capacitive Touch Sensor Features The TTP223 sensor can be used in a wide range of applications such as smartphones and tablets. It can also detect from behind glass and thin surfaces. When a finger touches the sensor, the module output gets HIGH, and immediately switches to LOW if not touched. The operating voltage is 2 to 5.5 V. Its maximum response time is 220 milliseconds. You can download the datsheet of this module here. [wpdm_package id='19196'] TTP223 Capacitive Touch Sensor...

MicroDuino Touch Sensor Features This touch button is a simple digital output sensor. It uses the TTP223 chip to detect capacitance change. This sensor features small size, high sensitivity, long power consumption and long lifespan. When the sensor is touched, its output is LOW, otherwise it is HIGH. You can download the datsheet of this module here. [wpdm_package id='19221'] MicroDuino Touch Sensor Pinout This Module has 4 pins: VCC: Module power supply – 3.3 to 5 V GND: Ground OUT: ...