Search results for: 'Sensor'

VL53L0X Distance Sensor Features The VL53L0X sensor is a laser rangefinder. First, the sensor sends a laser pulse, and the distance from object to the sensor is estimated by measuring the travel time of the laser pulse. Due to the very high speed of light, this sensor is not used in applications less than a millimeter. This module can measure a maximum distance of 2 meters. The operating voltage is 2.8 to 5 volts and it uses the I2C protocol to communicate with the microcontroller. You can down...

TTP223 Capacitive Touch Sensor Features The TTP223 sensor can be used in a variety of applications such as smartphones and tablets. The sensor can recognize objects even from behind glass and thin surfaces. The operating voltage is 2 to 5.5V. The maximum response time is 220 milliseconds. This module has two non-soldered adjustment pins: A and B. The working modes are as follows:A and B both open: The default value of the output pin is LOW. When the sensor is subjected to touch, the output is HIGH, and...

Overview In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code. What You Will Learn How soil moisture sensors work How to use soil moisture sensor with Arduino Soil Moisture Sensor - How Does It Work? The soil moisture sensor consists of two probes that measure the volume of water in the soil. The two probes allow the electric current to pass through the soil and, according to its resistance,...

DHT22 Temperature Humidity Sensor Features The DHT22 Temperature Humidity Sensor is a great choice for measuring ambient temperature and humidity. This sensor consists of a capacitive humidity sensor and a heat resistor. The DHT22 sensor has a wide range of temperature and humidity measurement. It can measure temperature in range of -40 to +125 degrees Celsius with 0.5 degrees Celsius accuracy. Humidity is measured in range of 0 to 100% with 2.5% accuracy. This sensor transmits data through a single di...

SHT31 Temperature Humidity Sensor Features The SHT31 sensor module is a temperature and humidity sensor with high accuracy and quick response time. Specifications: Temperature measurement range: -40 to +90 degrees Celsius Temperature measurement accuracy: 3 degrees Celsius Humidity measurement range: 0 - 100% RH Humidity measurement accuracy: 2% RH Communication protocol: I2C Data transition: up to 1MHz frequency Address pin included: To adjust I2C protocol address ...

EMG Muscular Signal Sensor Features In medical research, measuring the activity, contraction and expansion of muscles is important. The EMG muscle sensor measures the muscle activity and produces a signal to show the amount of expansion and contraction. Therefore, the output depends on the amount of activity in the selected muscle. 3 Green, red and yellow electrodes connect to the module for transmitting electrical signals from the muscle motion. Features: Small Form Factor Specially Designed for Micr...

If you're looking to interface the INA219 current sensor module with an Arduino, you've come to the right place. In this guide, we'll walk you through the necessary steps to get your setup up and running smoothly. INA219 Current Sensor Module Features The INA219 module is used to measure both current and voltage at the same time. This module uses I2C communication to transfer the voltage and current data. Other features: Measurement accuracy: 1% Maximum measured voltage: 26V Maximum measured current...

Heart Rate Sensor Module Features This module is designed for educational and entertainment purposes and is used to detect Cardiovascular pulse wave with finger. It uses a PPG (HRM-2511E) probe for data transmission. This sensor uses infrared light technology. If the amount of blood changes, the intensity of infrared light will change as well. This heart rate sensor has two analog and digital outputs and one LED for the digital output. You can see the heartbeat more accurately by the analog output. Featur...