Search results for: 'sensors g'

Interfacing AS608 Optical Fingerprint Sensor Module with Arduino provides a comprehensive guide on integrating the AS608 optical fingerprint sensor with Arduino for secure fingerprint scanning and identification. This step-by-step guide will walk you through the process of enrolling and verifying fingerprints using the AS608 module. Discover how to connect the module to Arduino, install the required library, and follow the enrollment and verification procedures. Get started on your fingerprint sensor projec...

SW-18010P Vibration Sensor Module Features The SW-18010P sensor is used to detect vibration. The sensor has a small spring inside a metal tube. When the sensor vibrates, the spring hits the metal tube and the sensor will be activated.This sensor has two digital and analog outputs. When the sensor vibrates, the digital output changes from HIGH to LOW and the analog output changes from 1023 to 0.Other features:Operating voltage: 3.3V to 5VIncluding a fixed hole on board for easy installationPotentiome...

Piezoelectric Vibration Sensor Features Piezoelectric vibration sensor is based on piezoelectric ceramic sheet. This sensor uses piezoelectric ceramics to generate vibration. When the piezoelectric ceramic piece vibrates, an electrical signal is generated.This sensor has two digital and analog outputs. The greater the vibration intensity, the higher the analog output voltage. Vibration amplitude sensitivity can be adjusted by the potentiometer. Note When the sensor vibrates, the digital outpu...

GY-31 TCS3200 Color Sensor Features The TCS3200 color sensor uses 64 photodiodes to detect color. The output of this sensor is a square wave. Color intensity is obtained directly from the frequency of the square wave. These 64 photodiodes consist of 16 diodes with red filter, 16 diodes with green filter, 16 diodes with blue filter and 16 transparent photodiodes without filter. All 16 diodes of each type are connected in parallel. To detect any color, the photodiodes corresponding to that color are activ...

BMP280 Pressure Sensor Features The BMP280 barometric pressure module is a tiny sensor to measure barometric pressure. Its small dimensions and its low power consumption allow for the implementation in battery powered devices such as mobile phones, GPS modules or watches.The key features are:Pressure range: 300 to 1100 hPaCapable of measuring temperaturePressure measurement accuracy: 0.12 hPaSupport I2C communication up to 3.4 MHzSupport SPI communication up to 10 MHzApplications:Indoor navigationWeath...

XKC-Y26-V Non-contact Liquid Level Sensor Features The XKC-Y26-V Non-Contact Liquid Level Sensor is a digital output sensor that detects the presence of liquid. There is an LED on the module, which will turn on if liquid is detected, otherwise it turns off. There is also a screw on the body of the module that you can use to adjust the sensitivity of the sensor. This sensor is suitable for dangerous applications such as detection of toxic substances, strong acids, strong alkalis, etc. ...

Overview In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code. What You Will Learn How soil moisture sensors work How to use soil moisture sensor with Arduino Soil Moisture Sensor - How Does It Work? The soil moisture sensor consists of two probes that measure the volume of water in the soil. The two probes allow the electric current to pass through the soil and, according to its resistance,...

DHT22 Temperature Humidity Sensor Features The DHT22 Temperature Humidity Sensor is a great choice for measuring ambient temperature and humidity. This sensor consists of a capacitive humidity sensor and a heat resistor. The DHT22 sensor has a wide range of temperature and humidity measurement. It can measure temperature in range of -40 to +125 degrees Celsius with 0.5 degrees Celsius accuracy. Humidity is measured in range of 0 to 100% with 2.5% accuracy. This sensor transmits data through a single di...

SHT10 Temperature Humidity Sensor Features The SHT10 module is a high accuracy sensor for measuring temperature and humidity. This module can be easily connected to a variety of microcontrollers using two digital output pins. One for data transfer and the other for adjusting data transfer speed between the module and the microcontroller. The range of temperature measurement is -40 to +123.8 degrees Celsius with 0.01 degrees Celsius accuracy. The humidity range is 0 to 100% with 0.05% accuracy. This module i...