Search results for: 'sensors arduinos'

BME280 Sensor Module Features The BME280 sensor module is a high-accuracy module for measuring temperature, humidity and atmospheric pressure. The key features are:Temperature Measuring range: -40 to +80 degrees Celsius; Accuracy: 1 degree Celsius In the range of 0 to +65 and 1.5 degrees Celsius out of this rangehumidity: 0-100%RH; Accuracy: 3%RH.pressure: 330hPa to 1100hPa. Accuracy: 1hPaThis module also calculates altitude indirectly using atmospheric pressure. The communication protocol of this sens...

HW-M10 Microwave Sensor Module Features The HW-M10 microwave sensor module is very accurate and widely used for motion detection in alarm and security systems. This module, like the PIR module, can detect any movement. The only difference is that instead of using radiation emitted by or reflected from objects, it uses microwave Doppler radar technology. This module has a digital output that is normally Low and becomes High (3.3V) if it detects motion and remains High for 2 to 3 seconds. ...

MPR121 Capacitive Touch Sensor Features The MPR121 capacitive touch sensor module is a high-precision touch sensor. This module has 12 touch buttons and supports I2C communication and can be easily interfaced with any microcontroller. There is no regulator on the board, so the supply voltage should be between 1.7 to 3.6VDC. MPR121 Capacitive Touch Sensor Pinout This module has 18 pins:6 Pins on the left:VCC: Module power supply – 3.3VIRQ: Interrupt outputSCL: Se...

EMG Muscular Signal Sensor Features In medical research, measuring the activity, contraction and expansion of muscles is important. The EMG muscle sensor measures the muscle activity and produces a signal to show the amount of expansion and contraction. Therefore, the output depends on the amount of activity in the selected muscle. 3 Green, red and yellow electrodes connect to the module for transmitting electrical signals from the muscle motion. Features: Small Form Factor Specially Designed for Micr...

MTH02 Temperature and Humidity Sensor Features There are various types of temperature and humidity sensors on the market in terms of price, accuracy and measurement range. The MTH02O is one the smallest type of these sensors. This sensor uses a digital pin to transfer the temperature and humidity data.Features:Low power consumptionSmall sizetemperature Measurement range: -40°C to +70°C with 0.5°C accuracyHumidity range: 18% to 98% with 3% accuracyApplication:HVACConsumer ProductsTesting and measur...

If you're looking to interface the INA219 current sensor module with an Arduino, you've come to the right place. In this guide, we'll walk you through the necessary steps to get your setup up and running smoothly. INA219 Current Sensor Module Features The INA219 module is used to measure both current and voltage at the same time. This module uses I2C communication to transfer the voltage and current data. Other features: Measurement accuracy: 1% Maximum measured voltage: 26V Maximum measured current...

TCRT5000 IR Sensor Features This sensor which is mostly used for line tracking, works like motion detection sensors. It is based on TCRT5000 IC. The TCRT5000 is a sensor that emits infrared light continuously. If the transmitted wave is not reflected or is reflected very poorly, the output will be LOW. If you put an object in front of this sensor, the output becomes HIGH. Note Black color absorbs the transmitted IR radiation and reflects it very poorly. So the output will be LOW if there is ...

AD8232 ECG Module Features The AD8232 sensor can provide you to monitor electrocardiographic or ECG signals. Analyzing these signals prepares useful information about heart function, such as heartbeat rate, heart rhythm, and other information regarding the heart’s condition. This module can be connected to a microcontroller on one side and to specific parts of body on the other side using 3 special electrodes. The signal received through the electrodes can be seen in the analog output of the sensor. ...

Heart Rate Sensor Module Features This module is designed for educational and entertainment purposes and is used to detect Cardiovascular pulse wave with finger. It uses a PPG (HRM-2511E) probe for data transmission. This sensor uses infrared light technology. If the amount of blood changes, the intensity of infrared light will change as well. This heart rate sensor has two analog and digital outputs and one LED for the digital output. You can see the heartbeat more accurately by the analog output. Featur...

Photoelectric Encoder Module Features Motors are used in a wide variety of applications such as robotics, industry, research and educational projects. In most of these applications, it is necessary to calculate the rotation speed, the direction of rotation and the position of the motor shaft. Rotary encoder modules can be used for this purpose. Rotary encoder is a type of module that converts rotation into electrical signals. The rotary encoder has two output pins: A and B. If the rotary encoder i...