Search results for: 'with 2'

BME280 Sensor Module Features The BME280 sensor module is a high-accuracy module for measuring temperature, humidity and atmospheric pressure. The key features are:Temperature Measuring range: -40 to +80 degrees Celsius; Accuracy: 1 degree Celsius In the range of 0 to +65 and 1.5 degrees Celsius out of this rangehumidity: 0-100%RH; Accuracy: 3%RH.pressure: 330hPa to 1100hPa. Accuracy: 1hPaThis module also calculates altitude indirectly using atmospheric pressure. The communication protocol of this sens...

MPR121 Capacitive Touch Sensor Features The MPR121 capacitive touch sensor module is a high-precision touch sensor. This module has 12 touch buttons and supports I2C communication and can be easily interfaced with any microcontroller. There is no regulator on the board, so the supply voltage should be between 1.7 to 3.6VDC. MPR121 Capacitive Touch Sensor Pinout This module has 18 pins:6 Pins on the left:VCC: Module power supply – 3.3VIRQ: Interrupt outputSCL: Se...

MTH02 Temperature and Humidity Sensor Features There are various types of temperature and humidity sensors on the market in terms of price, accuracy and measurement range. The MTH02O is one the smallest type of these sensors. This sensor uses a digital pin to transfer the temperature and humidity data.Features:Low power consumptionSmall sizetemperature Measurement range: -40°C to +70°C with 0.5°C accuracyHumidity range: 18% to 98% with 3% accuracyApplication:HVACConsumer ProductsTesting and measur...

If you're looking to interface the INA219 current sensor module with an Arduino, you've come to the right place. In this guide, we'll walk you through the necessary steps to get your setup up and running smoothly. INA219 Current Sensor Module Features The INA219 module is used to measure both current and voltage at the same time. This module uses I2C communication to transfer the voltage and current data. Other features: Measurement accuracy: 1% Maximum measured voltage: 26V Maximum measured current...

AD8232 ECG Module Features The AD8232 sensor can provide you to monitor electrocardiographic or ECG signals. Analyzing these signals prepares useful information about heart function, such as heartbeat rate, heart rhythm, and other information regarding the heart’s condition. This module can be connected to a microcontroller on one side and to specific parts of body on the other side using 3 special electrodes. The signal received through the electrodes can be seen in the analog output of the sensor. ...

GUVA-S12SD UV Sensor Module Features Ultraviolet (UV) light is produced by sunlight. Gradual thinning of Earth's ozone layer has increased the amount of UV radiation which can lead to sunburn and other problems. UV radiation is a form of electromagnetic radiation with wavelength from 200 nm to 370 nm, shorter than that of visible light, but longer than X-rays. The GUVA-S12SD UV sensor module is used for detecting the intensity of ultraviolet radiation. This module has an analog output that changes wit...

SHT20 Temperature and Humidity Sensor Features The SHT20 temperature and humidity module is high-precious, full calibrated, with very low power consumption and high response speed. This sensor is a combination of a capacitive humidity sensor and a silicon band gap temperature sensor. The key features are:Temperature measurement range: -40 to +125 °CTemperature measurement accuracy: 0.3 °CHumidity measurement range: 0 to 100%Humidity measurement accuracy: 3% RHCommunication Protocol: I2C ...

LoRa SX1278 Transceiver Module Features Electronic devices need to be connected wirelessly in so many cases. In these cases, Radio Frequency or RF equipments are used. RF modules include all radio waves that can travel different distances and reach the receiver according to their frequency and amplitude. LoRa is a popular technology that is perfectly suitable for IoT projects with long distance communications. This module is an Ai-Thinker technology module which also produces ESP32 series. This module...

Are you tired of having a desk cluttered with wires? Do you want to get rid of them? Well, we have a solution for that!In this tutorial, we’ll introduce you the nRF24L01 module, which is one of the most popular modules for wireless communication. Whether you are a beginner or experienced user, you’ll learn a new way to send and receive data.In this tutorial, we will explore the functionality of the nRF24L01 module and show you how to interface it with Arduino and ESP32/8266-based boards to create wirele...

APC220 Wireless Data Communication Module Features Electronic devices need to be connected wirelessly in so many cases. In these cases, Radio Frequency or RF equipments are used. RF modules include all radio waves that can travel different distances and reach the receiver according to their frequency and amplitude.The APC220 module uses UART / TTL for communication. This module comes with a USB to TTL converter that you can use to connect the module directly to your system and connect the second modul...