Search results for: 'sensors g'

TMP36 Temperature Sensor Features The TMP36 sensor is used to measure temperature from -40°C to +125°C and its tolerance threshold is +150°C. This sensor is calibrated directly on Celsius and its accuracy is 2°C. This sensor has an analog output. The output voltage changes linearly as the temperature changew. For example, the sensor output voltage is 0.75 volts at 25°C and 2.7 volts at 125°C.This sensor can be used in environmental control systems, thermal protection, fire alarms, CPU thermal m...

LJ12A3-4-Z/BX Inductive Proximity Sensor Features Proximity sensors are used to detect the presence of nearby objects. The LJ12A3-4-Z / BX sensor has three pins, two of which are connected to a supply voltage of 6 to 36 V. The output pin is PNP and NO (Normal Open). That is, it is normally Low and when it detects an object, it becomes HIGH. The detection distance is 4 mm, and it can only detect metal objects such as copper, aluminum, iron, etc. Note Since the operation voltage is more than 5 V,...

4-bit Button Touch Proximity Sensor Features This module has 4 fingerprint touch inputs and 4 digital output pins. It also has 5 LEDs. One for power supply and 4 LEDs indicate fingerprint sensors. If you touch each sensor, the output becomes HIGH and the LED turns on. If you don’t touch, the output will be LOW and the LED turns off.This module can be used on glass, ceramic, plastic and other surfaces. 4-bit Button Touch Proximity Sensor Pinout This module has 6 pi...

TTP223 Capacitive Touch Sensor Features The TTP223 sensor can be used in a variety of applications such as smartphones and tablets. The sensor can recognize objects even from behind glass and thin surfaces. The operating voltage is 2 to 5.5V. The maximum response time is 220 milliseconds. This module has two non-soldered adjustment pins: A and B. The working modes are as follows:A and B both open: The default value of the output pin is LOW. When the sensor is subjected to touch, the output is HIGH, and...

SI7021 Temperature and Humidity Sensor Features The SI7021 humidity and temperature sensor is a CMOS integrated sensor with I2C communication protocol. This sensor is factory calibrated and calibration data is stored in an on-chip non-volatile memory.This sensor is used in various applications such as thermostat and humidistats, respiratory therapy, Indoor weather stations, tablets, mobile phones, etc.Humidity measurement range: 0 to 100%RH - Accuracy 3%RHTemperature measuring range: -40°C to +125°C ...

OMRON Photoelectric Sensor Features The Omran photoelectric sensor can be used to detect obstacles and objects at 5 to 100 mm distance. There is an LED on the sensor that is always off and turns on when it detect an obstacle. You can also change the LED status using the potentiometer which is on sensor. (That is, the LED is always on and will turn off when the obstacle is detected.) There is another potentiometer on the sensor that can be used to change the sensitivity of the sensor (increase or decrease th...

SS49E Linear Hall Effect Sensor Features The output of SS49E linear Hall sensor provides an analog voltage representing if a magnetic field is present. So, this small and versatile sensor can be used in systems containing permanent magnets or an electromagnets in order to monitor magnetic field change. The output voltage is in the range of 2.25V to 2.75V. In this sensor, amplifier, voltage regulator and logic switching circuits are used to overcome noise in the output. SS49E Linear Hall Effe...

IR Flame Sensor Analog Output Features This flame sensor module with analog output can be used to detect flames. You can easily connect this module to a variety of microcontrollers and make a device to detect fire. The output is an analog voltage, whose maximum value is 5 volts and will decrease as the flame increases. IR Flame Sensor Analog Output Pinout This Module has 3 pins:OUT: Analog OutputVCC: Module power supply – 5VGND: GroundYou can see the pinout of thi...

SR04 Ultrasonic Sensor Features The SRF04 ultrasonic distance sensor can be used to measure distance with high accuracy. The basic working principle of this sensor is that it produces a high-level signal and sends it to the obstacle. Then the receiver detects the returned wave. The time between the transmission and reception of the signal allows us to calculate the distance to an object. Note When the Trig pin is set High, the sensor generates and sends ultrasonic sound. At that moment the Ech...

Overview In many projects such as flying robots, weather stations, improving routing performance, sports etc. measuring pressure and altitude is very important. In this tutorial, you’ll learn how to use the BMP180 sensor, which is one of the most commonly used sensors for measuring the pressure. https://electropeak.com/learn/wp-content/uploads/2019/07/Bmp-Cover-Video.compressed-2.m4v What You Will Learn What the barometric pressure is. What the BOSCH BMP180 pressure sensor is. ...