Search results for: 'sensors with'

HTTM Series Capacitive Touch Sensor Features This touch module is available in different series with a variety of backlight colors. It features low price, high efficiency and long lifespan. The sensor part can also be placed on glass and thin plastic.Its output is on trigger mode which works like a switch. That is, when it is touched, its will be HIGH and remains HIGH until the next touch.The input voltage is 2.7 to 6 V and output pin voltage is 3.3 V. You can download t...

Heart Rate Pulse Sensor Features Heart Rate Pulse Sensor can be used to measure the heart rate and some related parameters such as cardiac arrhythmia (i.e., abnormal heart rhythm). If you touch this sensor with any area of your skin that is closest to the arteries (such as the finger or earlobe), the sensor detects blood in the arteries. Each time the heart beats, blood is pumped through the arteries, and the sensor detects the flow of blood and increases the output voltage. Note This sensor has an analog o...

Inductive Proximity Sensor LJ12A3-4-Z/BY Features A proximity sensor is a sensor able to detect the presence of nearby objects. The inductive proximity sensor LJ12A3-4-Z / BY has three pins, two of which are connected to a supply voltage of 6 to 36V. The output pin is PNP and NO (Normally Open). That is, it is normally Low and when it detects an object, it is HIGH. The detection distance is 4 mm and it can only detect metal objects such as copper, aluminum, iron, etc. Note Because the operatio...

LJ12A3-4-Z/BX Inductive Proximity Sensor Features Proximity sensors are used to detect the presence of nearby objects. The LJ12A3-4-Z / BX sensor has three pins, two of which are connected to a supply voltage of 6 to 36 V. The output pin is PNP and NO (Normal Open). That is, it is normally Low and when it detects an object, it becomes HIGH. The detection distance is 4 mm, and it can only detect metal objects such as copper, aluminum, iron, etc. Note Since the operation voltage is more than 5 V,...

SI7021 Temperature and Humidity Sensor Features The SI7021 humidity and temperature sensor is a CMOS integrated sensor with I2C communication protocol. This sensor is factory calibrated and calibration data is stored in an on-chip non-volatile memory.This sensor is used in various applications such as thermostat and humidistats, respiratory therapy, Indoor weather stations, tablets, mobile phones, etc.Humidity measurement range: 0 to 100%RH - Accuracy 3%RHTemperature measuring range: -40°C to +125°C ...

SS49E Linear Hall Effect Sensor Features The output of SS49E linear Hall sensor provides an analog voltage representing if a magnetic field is present. So, this small and versatile sensor can be used in systems containing permanent magnets or an electromagnets in order to monitor magnetic field change. The output voltage is in the range of 2.25V to 2.75V. In this sensor, amplifier, voltage regulator and logic switching circuits are used to overcome noise in the output. SS49E Linear Hall Effe...

IR Flame Sensor Analog Output Features This flame sensor module with analog output can be used to detect flames. You can easily connect this module to a variety of microcontrollers and make a device to detect fire. The output is an analog voltage, whose maximum value is 5 volts and will decrease as the flame increases. IR Flame Sensor Analog Output Pinout This Module has 3 pins:OUT: Analog OutputVCC: Module power supply – 5VGND: GroundYou can see the pinout of thi...

Interfacing AS608 Optical Fingerprint Sensor Module with Arduino provides a comprehensive guide on integrating the AS608 optical fingerprint sensor with Arduino for secure fingerprint scanning and identification. This step-by-step guide will walk you through the process of enrolling and verifying fingerprints using the AS608 module. Discover how to connect the module to Arduino, install the required library, and follow the enrollment and verification procedures. Get started on your fingerprint sensor projec...

SW-18010P Vibration Sensor Module Features The SW-18010P sensor is used to detect vibration. The sensor has a small spring inside a metal tube. When the sensor vibrates, the spring hits the metal tube and the sensor will be activated.This sensor has two digital and analog outputs. When the sensor vibrates, the digital output changes from HIGH to LOW and the analog output changes from 1023 to 0.Other features:Operating voltage: 3.3V to 5VIncluding a fixed hole on board for easy installationPotentiome...

GY-31 TCS3200 Color Sensor Features The TCS3200 color sensor uses 64 photodiodes to detect color. The output of this sensor is a square wave. Color intensity is obtained directly from the frequency of the square wave. These 64 photodiodes consist of 16 diodes with red filter, 16 diodes with green filter, 16 diodes with blue filter and 16 transparent photodiodes without filter. All 16 diodes of each type are connected in parallel. To detect any color, the photodiodes corresponding to that color are activ...