Search results for: 'el en arduino'

TM7711 24-bit Pressure Module Features The TM7711 is a 24-bit 2-channel analog-to-digital converter used to measure resistance changes. This module is widely used in load cell and air pressure sensors. This module features high accuracy, quality and cost-effectiveness. Note This module does not support I2C communication. You can download the datasheet of this module here. [wpdm_package id='18020'] TM7711 24-bit Pressure Module Pinout This sensor has 8 pins: VIN: Module power supply – 3.3-5...

4 Channel Infrared Module Features This module has 4 IR transmitter and receiver pairs that can be used to detect black and white color as well as obstacles. Each channel has digital voltage output. You can adjust the sensor’s sensitivity using the on board potentiometers. Pinout You can see pinout of IR module in the image below. Required Materials Hardware Components Arduino UNO R3 × 1 4 Channel IR Obstacle Avoidance Proximity Module × 1 Male to Male jumper wir...

YZC-161B Load Cell Sensor Features Load cells are electronic sensors used for measuring weight and force. Load cells are made of alloy and a number of tensile strengths. When force is on the load cell, the spring element is slightly deformed, and unless overloaded, always returns to its original shape. The capacity of a load cell is the maximum amount of force it can withstand. Notes To measure tensile strength changes, we use the HX711 module. It is a high-precision analog-to-digital converter...

GML692 Load Cell Sensor Features Load cells are electronic sensors used to measure weight and force. The structure of a load cell is made of an alloy body and a number of tensile strengths that change value by applying force and return to their original value by removing force. The capacity of a load cell is the maximum amount of force it can withstand. Note To measure tensile strength changes, we use the HX711 module. It is a high-precision analog-to-digital converter. Note 2 If you w...

OMRON Photoelectric Sensor Features The Omran photoelectric sensor can be used to detect obstacles and objects at 5 to 100 mm distance. There is an LED on the sensor that is always off and turns on when it detect an obstacle. You can also change the LED status using the potentiometer which is on sensor. (That is, the LED is always on and will turn off when the obstacle is detected.) There is another potentiometer on the sensor that can be used to change the sensitivity of the sensor (increase or decrease th...

Piezoelectric Vibration Sensor Features Piezoelectric vibration sensor is based on piezoelectric ceramic sheet. This sensor uses piezoelectric ceramics to generate vibration. When the piezoelectric ceramic piece vibrates, an electrical signal is generated.This sensor has two digital and analog outputs. The greater the vibration intensity, the higher the analog output voltage. Vibration amplitude sensitivity can be adjusted by the potentiometer. Note When the sensor vibrates, the digital outpu...

XKC-Y26-V Non-contact Liquid Level Sensor Features The XKC-Y26-V Non-Contact Liquid Level Sensor is a digital output sensor that detects the presence of liquid. There is an LED on the module, which will turn on if liquid is detected, otherwise it turns off. There is also a screw on the body of the module that you can use to adjust the sensitivity of the sensor. This sensor is suitable for dangerous applications such as detection of toxic substances, strong acids, strong alkalis, etc. ...

TTP224 Capacitive Touch Sensor Module Features This 4 Channel Capacitive Touch Sensor Module uses the TTP224 IC and is actually a combination of 4 capacitive touch sensors. This module has 4 outputs, by touching each button from 1 to 4, the corresponding output will be High. There are also 4 LEDs on the module that will turn on by touching each button. TTP224 Capacitive Touch Sensor Module Pinout This module has 12 pins and 4 touch buttons:6 pins on the Right:OUT1: ...

Photoelectric Encoder Module Features Motors are used in a wide variety of applications such as robotics, industry, research and educational projects. In most of these applications, it is necessary to calculate the rotation speed, the direction of rotation and the position of the motor shaft. Rotary encoder modules can be used for this purpose. Rotary encoder is a type of module that converts rotation into electrical signals. The rotary encoder has two output pins: A and B. If the rotary encoder i...