Search results for: 'sensor module'

801S Vibration Module Features The 801S vibration sensor module has a digital output pin that gives HIGH output by detecting vibration up to a certain threshold. The sensitivity of this sensor can be adjusted with a potentiometer on the module. The IC on this module is LM358. This module can be used in security systems. Note The module's sensitivity is very high. You can download the datasheet of this module here. [wpdm_package id='17349'] 801S Vibration Module Pinout This sensor has 3 pins: ...

YwRobot Touch Sensor Module Features Touch Sensor is used to detect human finger touch. It is known as a touch switch as well. These sensors are easy to use and useful in many projects. Before touching the sensor, the output signal is always HIGH. When a human finger touches the sensor, it will generate a LOW level signal. This module also has an LED that lights up when the sensor is touched. Note This module works in trigger mode. That is when the sensor is touched, the digital output is LOW a...

Overview In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code. What You Will Learn How soil moisture sensors work How to use soil moisture sensor with Arduino Soil Moisture Sensor - How Does It Work? The soil moisture sensor consists of two probes that measure the volume of water in the soil. The two probes allow the electric current to pass through the soil and, according to its resistance,...

If you're looking to interface the INA219 current sensor module with an Arduino, you've come to the right place. In this guide, we'll walk you through the necessary steps to get your setup up and running smoothly. INA219 Current Sensor Module Features The INA219 module is used to measure both current and voltage at the same time. This module uses I2C communication to transfer the voltage and current data. Other features: Measurement accuracy: 1% Maximum measured voltage: 26V Maximum measured current...

Heart Rate Sensor Module Features This module is designed for educational and entertainment purposes and is used to detect Cardiovascular pulse wave with finger. It uses a PPG (HRM-2511E) probe for data transmission. This sensor uses infrared light technology. If the amount of blood changes, the intensity of infrared light will change as well. This heart rate sensor has two analog and digital outputs and one LED for the digital output. You can see the heartbeat more accurately by the analog output. Featur...

UVM30A UV Sensor Module Features Ultraviolet (UV) light is produced by sunlight. Gradual thinning of Earth's ozone layer has increased the amount of UV radiation which can lead to sunburn and other problems. UV radiation is a form of electromagnetic radiation with wavelength from 200 nm to 370 nm, shorter than that of visible light, but longer than X-rays. The UVM30A UV sensor module is used for detecting the intensity of ultraviolet radiation. This module has an analog output that changes with the int...