Search results for: 'Sensors'

TMP36 Temperature Sensor Features The TMP36 sensor is used to measure temperature from -40°C to +125°C and its tolerance threshold is +150°C. This sensor is calibrated directly on Celsius and its accuracy is 2°C. This sensor has an analog output. The output voltage changes linearly as the temperature changew. For example, the sensor output voltage is 0.75 volts at 25°C and 2.7 volts at 125°C.This sensor can be used in environmental control systems, thermal protection, fire alarms, CPU thermal m...

Piezoelectric Vibration Sensor Features Piezoelectric vibration sensor is based on piezoelectric ceramic sheet. This sensor uses piezoelectric ceramics to generate vibration. When the piezoelectric ceramic piece vibrates, an electrical signal is generated.This sensor has two digital and analog outputs. The greater the vibration intensity, the higher the analog output voltage. Vibration amplitude sensitivity can be adjusted by the potentiometer. Note When the sensor vibrates, the digital outpu...

TCRT5000 IR Sensor Features This sensor which is mostly used for line tracking, works like motion detection sensors. It is based on TCRT5000 IC. The TCRT5000 is a sensor that emits infrared light continuously. If the transmitted wave is not reflected or is reflected very poorly, the output will be LOW. If you put an object in front of this sensor, the output becomes HIGH. Note Black color absorbs the transmitted IR radiation and reflects it very poorly. So the output will be LOW if there is ...

KY-037 Sound Sensor Module Features KY-037 module consists of a capacitive microphone and an amplifier circuit. The output of this module is both analog and digital. You can download the datasheet of this module here.[wpdm_package id='16686'] KY-037 Sound Module Pinout This module has 4 pins, 2 of them are for power supply. Pin 1: The analog output. It’s value changes according to the intensity of the received sound. It can be connected to the Arduino analog ...

DHT11 Sensor Features The DHT11 is a digital temperature and humidity sensor. This sensor is able to measure the humidity in the range of 20% to 80% with an accuracy of 5%. It can also measure the temperature in the range of 0 to 50 degrees Celsius with an accuracy of 2 degrees. Note The sampling frequency of this sensor is 1Hz. As a result, there must be at least one second between every readings of the sensor, otherwise the reading values will be incorrect. ...

DHT11 Sensor Features The DHT11 is a digital temperature and humidity sensor. This sensor is able to measure the humidity in the range of 20% to 80% with an accuracy of 5%. It can also measure the temperature in the range of 0 to 50 degrees Celsius with an accuracy of 2 degrees. Note The sampling frequency of this sensor is 1Hz. As a result, there must be at least one second between every readings of the sensor, otherwise the reading values will be incorrect. ...

GP2Y0A02YK0F Infrared Sensor Features Sharp GP2Y0A02YK0F is an IR sensorusing infrared wave to measure distance. The output of the sensor is analog voltage, which can be read easily by ADC channel of the microcontroller. This sensor can be used in industry and especially in robotics. Sharp GP2Y0A02YK0F has an efficient range of 20 to 150cm. Note The sensor's output data would be incorrect at distances less than 20 cm and more than 150 cm. You can download the datasheet of this module here. [wpdm_p...