Need Help? +44 (0) 123 4567
You can add your content here.

Search results for: 'Sensors'

Items 101 to 110 of 197 total

Show per page
  • MPL3115A2 Sensor Features This small board has an MPL3115A2 pressure sensor or barometer. The communication protocol of this module is I2C. In addition to measuring pressure and altitude, this module can also measure temperature. MPL3115A2 Module Pinout This sensor has 6 pins:+5V: Module power supply – 5 VGND: GroundSLC: I2C ClockSDA: I2C dataYou can see pinout of this module in the image below. You can download the datasheet of this...
  • MPL3115A2 Pressure/Altitude Sensor Features The MPL3115A2 pressure and altitude sensor is a MEMS pressure sensor that generates altitude data. The sensor outputs are converted to digital data by high-resolution 24bit ADC and transfer over I2C, which means that this module easily communicates with most microcontrollers. The unit of pressure and height is Pascal and meter respectively. The module also measures 12-bit temperature in degrees Celsius. MPL3115A2 Module Pinout ...
  • LPS331AP Pressure/Altitude Module Features This small board has an LPS331AP pressure sensor or barometer. The communication protocol of this module is I2C and SPI. In addition to measuring pressure and altitude, this module can also measure temperature. LPS331AP Sensor Pinout This sensor has 9 pins. 4 pin are more useful:+5V: Module power supply – 5 VGND: GroundSLC: I2C ClockSDA: I2C dataYou can see pinout of this module in the image below. ...
  • SHT31 Temperature & Humidity Sensor Features SHT31 is a digital temperature and humidity sensor. This module uses I2C communication and there are two SCL and SDA pins that are needed to be hooked up in order to communicate to this sensor. This sensor is ideal for temperature and humidity sensing. Temperature measurement range: -40° +125°/ Accuracy ±0.3C° Humidity measuring range: 0-100% RH°/ Accuracy ±2% You can download the datasheet of this module here. [wpdm_package id=...
  • R308 Biometric Fingerprint Module Features R308 biometric fingerprint module is a high-precision, high-performance matching algorithm and high-capacity flash chip. It works based on fingerprint image processing, matching, memory search and performing and desired functions. It uses serial communication in order to communicate with microcontroller. The default Baud Rate is 57600, and it is not possible to change it. This module can store up to 500 fingerprints. You can down...
  • TM7711 24-bit Pressure Module Features The TM7711 is a 24-bit 2-channel analog-to-digital converter used to measure resistance changes. This module is widely used in load cell and air pressure sensors. This module features high accuracy, quality and cost-effectiveness. Note This module does not support I2C communication. You can download the datasheet of this module here. [wpdm_package id='18020'] TM7711 24-bit Pressure Module Pinout This sensor has 8 pins: VIN: Module power supply – 3.3-5...
  • TCRT5000 IR SENSOR Features The TCRT5000 sensor consist of an IR transmitter and IR receiver. When the proper voltage is applied to the infrared transmitter, it transmits and emits infrared waves. When these waves collide with an object, the infrared receiver, which is a phototransistor, receives the waves. A phototransistor works like a normal transistor, except that its base is excited by light. Note This sensor works best for objects in the range of 0.2 to 1.5 cm. You can download the datashe...
  • SHT30 Temperature & Humidity Sensor Features SHT30 is a digital temperature and humidity sensor. This module uses I2C communication and the 2 SCL and SDA pins are used to communicate with this sensor. This sensor is ideal for temperature and humidity sensing.  Temperature measurement range: 0°C to 65°C/ Accuracy Â±0.3°C Humidity measurement range: 0-100% RH/ Accuracy Â±3% RH You can download the datasheet of this module here...
  • SHT35 Temperature and Humidity Sensor Features SHT35 is a digital temperature and humidity sensor. This module uses I2C communication protocol and the 2 SCL and SDA pins are used in order to communicate to this sensor. This sensor is ideal for temperature and humidity sensing. Temperature measurement range: -40°C to 90°C/ Accuracy Â±0.2°C  Humidity measurement range: 0-100% RH/ Accuracy Â±1.5% RH You can download the datasheet of this module here. [wpdm_packag...

Items 101 to 110 of 197 total

Show per page
To Top
Help
Shop
Account
0 Cart