Search results for: 'temperature sensor arduino'

SI7021 Temperature and Humidity Sensor Features The SI7021 humidity and temperature sensor is a CMOS integrated sensor with I2C communication protocol. This sensor is factory calibrated and calibration data is stored in an on-chip non-volatile memory.This sensor is used in various applications such as thermostat and humidistats, respiratory therapy, Indoor weather stations, tablets, mobile phones, etc.Humidity measurement range: 0 to 100%RH - Accuracy 3%RHTemperature measuring range: -40°C to +125°C ...

DHT22 Temperature Humidity Sensor Features The DHT22 Temperature Humidity Sensor is a great choice for measuring ambient temperature and humidity. This sensor consists of a capacitive humidity sensor and a heat resistor. The DHT22 sensor has a wide range of temperature and humidity measurement. It can measure temperature in range of -40 to +125 degrees Celsius with 0.5 degrees Celsius accuracy. Humidity is measured in range of 0 to 100% with 2.5% accuracy. This sensor transmits data through a single di...

SHT10 Temperature Humidity Sensor Features The SHT10 module is a high accuracy sensor for measuring temperature and humidity. This module can be easily connected to a variety of microcontrollers using two digital output pins. One for data transfer and the other for adjusting data transfer speed between the module and the microcontroller. The range of temperature measurement is -40 to +123.8 degrees Celsius with 0.01 degrees Celsius accuracy. The humidity range is 0 to 100% with 0.05% accuracy. This module i...

SHT31 Temperature Humidity Sensor Features The SHT31 sensor module is a temperature and humidity sensor with high accuracy and quick response time. Specifications: Temperature measurement range: -40 to +90 degrees Celsius Temperature measurement accuracy: 3 degrees Celsius Humidity measurement range: 0 - 100% RH Humidity measurement accuracy: 2% RH Communication protocol: I2C Data transition: up to 1MHz frequency Address pin included: To adjust I2C protocol address ...

DHT21/AM2301 Temperature and Humidity Sensor Features The AM2301 / DHT21 temperature and humidity sensor consists of two sensors: A capacitive humidity sensor and a thermistor. This sensor transmits data using a single digital pin, so it can communicate with the microcontroller using only one digital pin. The sampling frequency is 0.5Hz, which means that you can get new data every two seconds. DHT21/AM2301 Temperature and Humidity Sensor Pinout This Module has 3 w...

BME280 Sensor Module Features The BME280 sensor module is a high-accuracy module for measuring temperature, humidity and atmospheric pressure. The key features are:Temperature Measuring range: -40 to +80 degrees Celsius; Accuracy: 1 degree Celsius In the range of 0 to +65 and 1.5 degrees Celsius out of this rangehumidity: 0-100%RH; Accuracy: 3%RH.pressure: 330hPa to 1100hPa. Accuracy: 1hPaThis module also calculates altitude indirectly using atmospheric pressure. The communication protocol of this sens...

MTH02 Temperature and Humidity Sensor Features There are various types of temperature and humidity sensors on the market in terms of price, accuracy and measurement range. The MTH02O is one the smallest type of these sensors. This sensor uses a digital pin to transfer the temperature and humidity data.Features:Low power consumptionSmall sizetemperature Measurement range: -40°C to +70°C with 0.5°C accuracyHumidity range: 18% to 98% with 3% accuracyApplication:HVACConsumer ProductsTesting and measur...

SHT20 Temperature and Humidity Sensor Features The SHT20 temperature and humidity module is high-precious, full calibrated, with very low power consumption and high response speed. This sensor is a combination of a capacitive humidity sensor and a silicon band gap temperature sensor. The key features are:Temperature measurement range: -40 to +125 °CTemperature measurement accuracy: 0.3 °CHumidity measurement range: 0 to 100%Humidity measurement accuracy: 3% RHCommunication Protocol: I2C ...

MTH01 Temperature and Humidity Sensor Features The MTH01 sensor module is a suitable sensor for measuring ambient temperature and humidity. This module actually consists of two sensors: an NTC type high precision temperature sensor and a resistive type relative humidity sensor. It can communicate to different microcontrollers through SPI interface. The key features of this module are:Temperature measurement range: -40 to +70 degrees CelsiusTemperature measurement accuracy: 0.5 degrees CelsiusHumidity m...

What is AM2301 Sensor? The AM2301 module is an internally-calibrated digital sensor that measures temperature and humidity. It can measure humidity from 0 to 99.9% with an accuracy of ±2% and temperatures from -40 to 80°C with an accuracy of ±3°C.This digital module uses a single-wire protocol for communication. So, apart from the power supply pins, it only needs one digital pin to communicate with the microcontroller. Using this protocol, we can transfer data through this line for a maximum distanc...