GP2Y0A02YK0F Infrared Sensor Features
Sharp GP2Y0A02YK0F is an IR sensorusing infrared wave to measure distance. The output of the sensor is analog voltage, which can be read easily by ADC channel of the microcontroller. This sensor can be used in industry and especially in robotics. Sharp GP2Y0A02YK0F has an efficient range of 20 to 150cm.
Note
The sensor's output data would be incorrect at distances less than 20 cm and more than 150 cm.
You can download the datasheet of this module here.
[wpdm_p...
GP2Y0A41SK0F Infrared Sensor Features
Sharp GP2Y0A41SK0F is an IR sensor that uses infrared wave to measure distance. The sensor’s output is analog, which can be easily read by microcontroller’s ADC converter. This sensor can be used in industry and especially in robotics. This sensor has an efficient range of 4cm to 30 cm.
Note
The sensor's accuracy will decrease at distances over 40cm.
You can download the datasheet of this sensor here.[wpdm_package id='...
GP2Y0A51SK0F Infrared Sensor Features
Sharp GP2Y0A51SK0F is an IR sensor that uses infrared wave to measure distance. The output of the sensor is analog voltage, which can be easily read by the microcontroller’s ADC converter. This sensor can be used in industry and especially in robotics. The efficient range of this module is 2 to 15 cm.
Note
At distances over 15cm, the sensor’s output is not accurate (usually shows higher than real value).
You can download the datasheet of this module here...
TCRT5000 Sensor Features
The TCRT5000 Sensor is used to detect color and distance. The sensor emits an infrared wave and then receives it. TCRT5000 Infrared Reflective Sensor Module is often used in line following robots and object sorting Robots since this module can sense if a surface is white or black.
The measuring distances range from 1mm to 8mm and the central point is about 2.5mm. There is also an onboard potentiometer to adjust the sensitivity.
TCRT5000 Sensor Pinout
This sensor has ...
LM393 Sensor Features
The LM393 module is an IR counter that has an IR transmitter and receiver. If any obstacle is placed between these sensors, a signal is sent to the microcontroller. The module can be used in association with a microcontroller for motor speed detection, pulse count, position limit, etc.
You can download the datasheet of this module here.
[wpdm_package id='17841']
LM393 Sensor Pinout
This sensor has 3 pins:
VCC: Module power supply – 3-5.5 V
GND: Ground
OUT: Digital...
