Search results for: 'driver arduino'

Overview In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield. What You Will Learn General information about DC motors Introduction to L293D motor shield Driving DC, Servo & Stepper motors Motors & Drivers Motors are an inseparable part of many robotics and electronics projects and have different types you can use depending on their application. Here is some information about different...

L298N DC Motor Driver Feature L298N module is used to drive DC motors with a current of less than 2 amps. This module is easy to use. It contains convenient filter circuit and have access to inputs and outputs via pin headers and terminals. The L298N is a dual full-bridge motor driver that allows two DC motors to be connected simultaneously. Note The L298N motor controller follows the H-bridge configuration, so it can be used to drive stepper motors too. This driver needs a logic voltage supply to drive t...

MX1508 Motor Driver Module Features The MX1508 driver is one of the cheapest drivers for running DC motors with a maximum current of 2 amps. Small dimensions and simple setup are the positive features of this module. The MX1508 is a dual full-bridge motor driver that allows two DC motors to be connected simultaneously. Note The MX1508 motor controller follows the H-bridge configuration, which is handy to drive a stepper motors.This driver has a temperature protection circuit that disables the d...

L298N Motor Driver Module Features The L298N module is used to drive DC motors with a maximum current of 2 amps. The L298N driver module is easy to use. It contains a good filter circuit and gives you access access to inputs and outputs via pin headers and terminals. The L298N is a dual full-bridge motor driver that allows two DC motors to be connected simultaneously. Note The L298N motor controller follows the H-bridge configuration, which is handy to drive a stepper motors. This driver needs a logic vo...

Discover how to effectively interface the IRF520 MOSFET Driver Module (HCMODU0083) with Arduino in this step-by-step tutorial. Learn about the key features of this module and explore its applications in controlling DC motors using Pulse Width Modulation (PWM) technique. With the ability to convert a constant input voltage to a variable voltage, this module allows precise control over the speed of your DC motor. Whether you're a beginner or an experienced Arduino enthusiast, this guide will help you master t...

TB6612FNG Dual Motor Driver Features Today, controlling the speed and direction of DC motors is very important due to their many applications. The most common method of controlling DC motors is the H-Bridge. This method allows you to control both the speed and the direction of the engine. The TB6612FNG dual module uses the same method to control two motors.One of the control pins of this module is PWM. This pin is connected to the gate of the transistor. The longer the duty cycle, the higher the voltag...

VNH2SP30 Moster Motor Driver Module Features Today, speed and direction control of DC motors is very common. A Full-Bridge circuit is one of the simplest methods to control a DC motor. This module is a Full-Bridge motor driver with high output current tolerance.INA, INB and PWM pins are used for controlling the speed and direction of motor rotation. The CS pin is also the current sensor. This pin's output voltage changes 0.13V per 1A.The input voltage should be between 5.5 and 16V. Also, the maximum al...

L298P Motor Driver Shield Features Today, DC motors are used in the manufacturing many tools and equipments. So, speed and direction control of these motors is very common. A half-bridge circuit is one of the simplest methods to control a DC motor. This method not only controls the motor direction, but also can be used for speed control. This shield is based on L298P IC. The most important features are: Control two DC motors simultaneously with voltage 4.8 to 24V and up to 2A current Schottky diodes ...

L9110 Dual Channel Driver Module Features Motor driver modules are very common nowadays and widely used to control the speed and direction of motors. The L9110S dual channel module is one of them. This module can control two DC motors and one stepper motor. It is based on L9110 IC. The key features are:The allowable continuous current for each channel:  800mA.The operating voltage: 2.5 - 12V.Two control pins for each DC motor.Suitable for toy cars motors.Can control one stepper motor. ...

L9110S Dual-Channel Driver Module Features Motor driver modules are very common nowadays and widely used to control the speed and direction of motors. The L9110S dual-channel module is one of them. This module can control two DC motors and one stepper motor. It is based on L9110 IC. The key features are: The allowable continuous current for each channel: 800 mA The maximum allowable current: 1.5 A Power supply: 2.5V to 12V Note The two connected pins to each DC motor can be PWM or digital. If define...